2018/05/09

OBDSTAR H110 Program VW Polo 2013 NEC 24C32 Key by OBD

OBDSTAR H110 supports key programming on VAG 2th,3th, 3.5th, 4th, 5th generation immobilizer system.  Here’s the guide to add VW Polo 2013 IMMO4 NEC 24C32 dealer key by OBD.

Connect H110 and RFID adapter with vehicle via OBD socket
obdstar-h110-vw-polo-nec24c32-1
Select Vehicles->Immobilizer->VW/Audi/Skoda/Seat->VW->Program Keys->4th Generation IMMO->NEC+24C32 ICM->Make ordinary dealer key
obdstar-h110-vw-polo-nec24c32-2
obdstar-h110-vw-polo-nec24c32-3
obdstar-h110-vw-polo-nec24c32-4
obdstar-h110-vw-polo-nec24c32-5
obdstar-h110-vw-polo-nec24c32-6
obdstar-h110-vw-polo-nec24c32-7
Turn ignition switch to ON position
Reading data
If OBDSTAR H110 key programmer prompts communication breakdown error, please check
obdstar-h110-vw-polo-nec24c32-8
1.Ignition is on “ON” position
2. Have connected main test cable with H110
3. Vehicle has enough power supply

Back to select Make ordinary dealer key again
obdstar-h110-vw-polo-nec24c32-9
Insert new key/chip to OBDSTAR RFID adapter
Reading data, the indicator of RFID adapter turns blue and keeps flashing
Generating dealer key
Make dealer key success.
obdstar-h110-vw-polo-nec24c32-10
obdstar-h110-vw-polo-nec24c32-11
Test the new key.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.