Pin code is required to program new key. The car comes with a card with IMMO security code. If you lose the card, X300 DP gives you an option to read pin code as well.
4-digit PIN code: 1606
Connect X300 DP with vehicle via OBD
Turn on ignition switch
Select IMMOBILIZER->GEELY/HUAPU/AQYL->Select from Vehicle->Geely->EMGRAND->E820->Immobilizer->STEC Immobilizer->Set Pincode->Input Pin code
OBDSTAR X300DP asks to enter 4-digit pin code and confirm
Pin code input completed.
Select Program function->Program keys
Before program new keys must delete all keys.
Program success
Number of programmed keys: 1
If you want to program next key, insert next key and turn on ignition switch, press ENTER to continue within 5 sec. If don't, press ESC.
Test the new key
http://www.obdii365.com/producttags/obdstar-x300-dp.html
http://www.key-programmer.org/2018/11/05/obdstar-x300-dp-program-new-key-for-geely-emgrand8-2014/
Select IMMOBILIZER->GEELY/HUAPU/AQYL->Select from Vehicle->Geely->EMGRAND->E820->Immobilizer->STEC Immobilizer->Set Pincode->Input Pin code
OBDSTAR X300DP asks to enter 4-digit pin code and confirm
Pin code input completed.
Select Program function->Program keys
Before program new keys must delete all keys.
Program success
Number of programmed keys: 1
If you want to program next key, insert next key and turn on ignition switch, press ENTER to continue within 5 sec. If don't, press ESC.
Test the new key
http://www.obdii365.com/producttags/obdstar-x300-dp.html
http://www.key-programmer.org/2018/11/05/obdstar-x300-dp-program-new-key-for-geely-emgrand8-2014/
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.