2016/08/11

How to add Honda Accord 2008 remote key by OBDSTAR X300 Pro3

Our engineer has managed to add a remote key for Honda Accord 2008 year by using new OBDSTAR X300 Pro3 Key Master key programmer.



Note: OBDSTAR X300 Pro3 in orange case is the same as Key Master in green case.

Adding Honda remote key procedure:


Connect OBDSTAR Key Master with vehicle, power on the key programmer
Select VEHICLES
Select IMMOBILISER
Select vehicle brand: HONDA/ACURA
Check vehicle software verison
honda-software-version

Select "Auto" add key

Select "Auto" add key
Select Immobiliser

Select Immobiliser

Select Honda connector 16-PIN or 3-PIN, the 2008 yr Honda comes with 16-PIN connector

Select Honda connector 16-PIN
OBDSTAR Key Master detect vehicle information
4th generation immobiliser device
The burglar type of code:0A
4th-immo

Select Function "Key"

Select Function "Key"
Tips: Key master full version can also replace immobiliser ECU, replace ECM/PCM and do keyless transmitter registration.

Turn ignition switch to ON with the original key

turn ignition to on
Select "Add a key"

Select "Add a key"

Turn in the ignition switch without changing the key within 16 seconds.

Turn in the ignition switch

Turn on the ignition switch with a new key within 11 seconds

Turn on the ignition switch

Follow system prompt until it is done.
Test the new added key.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.