GM ACDelco E80 Clone with OBDSTAR DC706

 Any chance to clone GM ACDelco E80 ECU without opening?

 

Yes, OBDSTAR DC706 programmer can read, clone E80 ECU on bench. It will read pin code as well.

I/O terminal will read and clone ACDelco E80 as well, but it ask to do checksum with ktag because I/O does not correct checksum. DC706 will correct checksum automatically.

 

For example: clone E80 of Chevrolet Equinox 2.0 Turbo

Select Brand->ECM->Chevrolet ACDelco E80 (bench)

Check instruction guide and pinout (here we use standard mode)

Follow wiring diagram to connect DC706 with E80 ECM via P004 adapter and jumper

Turn on ignition on p004 adapter and read ECU information

Read dFlash and save

Read Flash MPC and save

Read and save shaowflash

Read pin code

It is important to backup data before cloning.

How to backup obdstar dc706 data?

Insert a USB disk to DC706 USB port

Go to Home menu, press DP icon, go to Data Management->My data->Local data

Tick files you need to backup
Long press files you need to backup and press Copy

Paste Files to USB Disk.

If the device says copy successfully, remove USB disk after 10 seconds.

Then insert USB disk to desktop to backup data.

After backup data.

Connect OBDSTAR DC706 with a new ECM E80.

Write dFlash and Flash MPC accordingly.