Program Citroen C5 2011 Key by OBDSTAR F108

Obd365 engineers has successfully hooked up OBDSTAR F108 PSA PINCODE tool  key programmer to read PIN code/ security code for Citroen C5 2011 year. Here is the test report.

Tested on model Citroen C5 2011

Key programming procedure:

Connect OBDSTAR F108 key programmer to Citroen C5

Start OBDSTAR PSA Tool

Select FUNCTION-> IMMOBILIZER-> PEUGEOT/CITROEN/DS V31.09-> CITROEN

Select Read security code

Follow the screen instruction until you get the security code/ PIN code

Turn on the ignition, switch off the ignition switch..

Turn on the ignition

Reading security code…

Switch ignition off

Press ENTER and turn on the ignition

Reading security code…

Switch ignition off

……

(repeat the action)

Read security code SUCCESS!

Also, OBDSTAR F108 can program keys for:

Peugeot 1007

Peugeot 206

Peugeot 207

Peugeot 208

Peugeot 2008

Peugeot 301

Peugeot 306

Peugeot 307

Peugeot 308

Peugeot 3008

Peugeot 406

Peugeot 407

Peugeot 4007

Peugeot 508

Peugeot 5008

Peugeot 607

Peugeot 806

Peugeot 807

Peugeot Bipper

Peugeot Expert

Peugeot Partner

C2

C3

C3 Picasso

C3 Pluriel

C4 Cactus

C4 Picasso

C5

C8

C-Elysee

Xsara Picasso

Berlingo 2

Berlingo 3

Jumper

Jumpy

DS3

DS4

DS5

http://blog.obdii365.com/2016/06/23/program-citroen-c5-key-with-obdstar-f108/

Program Ford Escape,Fiesta, Focus key with OBDSTAR F100

The OBDSTAR F-100 Ford/Mazda key programmer arrived at my door two days ago. I have successfully programmed Ford Escape 2010 OK, Fiesta, Focus 2015-16 need code to access, F100 will read it. Do not need hook up extra incode calculator. Have not tested Mazda and other Ford yet. But i bet the money was well spent. 

http://www.obdii365.com/wholesale/f100-key-programmer.html

OBDSTAR X-200 Oil Reset on MB C, E, GLK, GLS

Customer:

I wanna do oil reset for my Mercedes GLK360 2013 and C300 2015. Which tool should I use? Does obdstar made X-200 fits the new models?

OBDII365 customer service:

You can try the genuine OBDSTAR X200 Pro oil reset tool. It has been tested OK with new Mercedes models made in the latest years.

Here is the procedures of oil reset on Mercedes!

1 New Mercedes-Benz C/ E/ GLK/ CLS… dashboard

You can do some operations or get dashboard information via buttons on the left of the steering wheel
2 the main menu of dashboard information

3 go to the option of Oil Reset via the LEFT or RIGHT button

4 adjust to ASSYST PLUS via the UP or DOWN button, then press OK

5 the dashboard displays the remaining mileage/ kilometers before oil reset next time

6 after oil reset with OBDSTAR X-200 pro, the dashboard displays the new KM

New Benz oil reset success!

Hope this helps!

http://obd365.blogrip.com/2016/06/21/obdstar-x200-oil-reset-on-mercedes-c-e-glk-gls/

OBDSTAR X100 Pro Program Key for Toyota Crown 2011

Here is the tutorial of Toyota Crown 2011 remote key programming with OBDSTAR X100 Pro auto key programmer.

2 optional methods:

1- replace the smart key’s ECU control box for key matching

2- disassemble ECU box to write initialized data, then use OBDSTAR X100 for key programming



Toyota Crown 2012:




The smart key ECU is located on the right of the car trunk

Disassemble the smart key ECU, take out the board to disassemble the S2934 chip

Replace S2934 with 93C76 / 93C86 to write initialized data

Solder the 93C76 / 93C86 chip

Reversely install the smart key ECU to the car, then insert the key




Press the ENGINE START STOP button until the yellow indicator lights up, turn ignition on


Connect OBDSTAR X-100 pro programmer to the car

Then start X100 pro

Enter TOYOTA-2012 CROWN-IMMOBILIZER-SMART CARD SYNCHRONIZATION

DO NOT remove the key

Press OK for the smart card synchronization

The SECURITY indicator on the dashboard turns ON for 10-20 seconds, then turns off automatically

Then smart card matching success

X100 PRO enters ADD SMART CARD, then follow the screen instruction

Note:

2012 Crown comes with the main and additional cards; only the main card is smart while the additional can do remote control and start the engine. The body and buttons on the main card is black, while the additional card’s is gray.

Left- main card; right- additional card


The smart control can be turned off with a switch under the steering wheel. Some users have thought of something wrong with the smart system. If you press it wrongly to cause the smart system out of order, just press it again to back normal.

KEY: cut off the switch smartly

SET: reset tire pressure



If you want to program two main smart keys, you should take the other out if the car at least 1 meter when programming the one; or you would failed to program keys.

http://blog.obdii365.com/2016/06/17/obdstar-x100-pro-program-toyota-crown-remote/