Original OBDSTAR Tools

Showing posts with label OBDSTAR X300 DP key programmer. Show all posts

2021/08/26

OBDSTAR Subaru 2013 up 8A Smart Key AKL

OBDSTAR Subaru immobilizer software update to V30.47.

1.Add XV 2012- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM);
2.Add FORESTER 2013- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM);
3.Add IMPREZA 2013- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM);
4.Add LIBERTY 2014- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM);
5.Add WRX 2014- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM);
6.Add LEGACY 2014- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM);
7.Add OUTBACK 2015- 72G Blade All Keys Lost (16 minutes to reset), Subaru 8A H Blade All keys lost (by Key SIM).

Apply to:

X300 DP Plus and X300 Pro4

KEY MASTER DP PLUS & KEY MASTER 5

2018/10/25

OBDSTAR X300 DP Serial Number Different from VCI Solution

Problem:
I had error when updating the OBDSTAR X300 DP tablet. It gave me error "Serial number is different from VCI box", But I've checked both device and VCI serial number,they are the same.

Obdii365.com engineer solution:
Run an upgrade.
obdstar-x300-dp-Tablet-Upgrade-guide.pdf
If still have this error, reset the VCI box.

How to reset VCI box of OBDSTAR X300 DP?
1. Turn on your tablet and click [Setting]

2. Click [Backup & reset]

3. Click [Factory data reset]

4. Power on VCI. Connect VCI and tablet by using USB.

5. Click [Setting]

6. Click [Self test] and [Communication test]

7. Please remove USB after the Bluetooth state and USB state show ok.
8. Click [one key upgrade]

http://www.obdii365.com/wholesale/brand-obdstar/

http://www.obdii365.com/upload/pro/how-to-reset-obdstar-x300-dp-vci.pdf

2018/08/03

OBDSTAR X300 DP Program Nissan GTR 2010 Remote Key

How to program smart remote key 3-button to Nissan GTR year 2010 (with card slot) using OBDSTAR X300 DP/ Key Master DP tablet key programmer.

Main steps:

Step 1: Read BCM code
Step 2: Calculate Pin Code
Step 3: Release steering wheel lock
Step 4: Program smart key
Step 5: Program chip
Step 6: Synchronize to start

Procedure:

Mark all remotes with number 1, 2,3

Remote number 1, 2 are programmed and number 3 is a new remote

Take all remotes out of the car

Close all doors and lock the steering lock

Step 1: Read 5-digit BCM Nissan code with X300 DP
Select Nissan->Nissan/Infitini V31.56->4-digital Pin code->Smart key system->Auto search->Button type->with card slot

Take all smart key out of the car and press Start button

Select Read BCM Code

Read 5-digit BCM code success: 8D060

Step 2: Calculate pin code
Select Pincode calculate->4 Digit Pincode->BCM code
Turn ignition off
Confirm BCM code

OBDSTAR X300DP calculated old pin code and new pin code

*GTR pre-2009 use old pincode
post-2009 use new pincode

Step 3 Release steering wheel lock

Select BCM (steering wheel lock)
Turn ignition off
X300 DP will ask pin code to access

This car is year 2010, so we enter new pin code

Steering wheel release success

Step 4: Program smart key with OBDSTAR X300 DP

Put all remotes inside the car

Turn on hazard light
Select With card slot->smart key system

Insert smart key into the slot (The slot is below the start button or the lower left corner

of the steering wheel) and switch ignition on

Select Program smart key
Press Yes if already releases steering wheel lock
Enter new pin code to access
Program successfully

Insert and turn on 5 seconds every keys

Insert 1st remote and turn on 5 seconds
Insert 2nd remote and turn on 5 seconds

Insert 3rd remote and turn on 5 seconds
Turn ignition off and take 3rd remote out

Step 5: Program chip

Insert 1st remote again turn ignition on and take out
Steering wheel lock release
Insert 2nd remote again turn ignition on and take out
Steering wheel lock release

Insert 3rd remote, turn ignition on and press brake to start car for 10 seconds

Step 6: Synchronize to start

Turn off and take out remote
Open and close driver door
Turn off hazard light
Test all remotes

All remote worked.

www.obdii365.com

http://www.key-programmer.org/2018/08/04/program-nissan-gtr-2010-remote-key-with-obdstar-x300-dp/

2018/03/29

How to solve OBDSTAR X300 DP “2711 check fail!” error

One customers sent e-mail to ask how to correct odometer for VW cluster. And he get into trouble of “2711 check fail!” when correcting odometer for VW Amarok by using OBDSTAR X300 DP .

Customer:

“I tried doing mileage adjustment on the VW Amarok, however it gives me the error as in the picture”

Engineer Solution:

If you ever wonder, to adjust the VW Amarok Odometer, you need to choose Golf, NEC+24C64, then VDO-12 and it will complete change.

OBDSTAR Tech Advice:

For VW mileage correction, engineer said it depends on cluster instrument type rather than the car model.

2018/02/23

OBDSTAR X300 DP Program Chevrolet Sonic 2014 all key lost

Program Chevrolet Sonic 2014 all key lost with OBDSTAR X300 DP /key master DP without pin

Do not use other tool do not use pin code

2018/02/02

OBDSTAR X300 DP Reset Odometer on Peugeot BSI 2004 HC05

OBDSTAR X300 DP/X300 Pro3/Key Master/Key Master DP has released free Pin code reading, ecu auto identification, eeprom read/write, odometer correction features for Peugeot/Citroen/DS models:

Here’s an example on reset odometer on Peugeot 2004 BSI HC05

Remove Peugeot BSI box from car

Connect X300 DP/Key Master DP with VCI unit and BSI module

Turn on X300 DP

Select Cluster Calibrate->Peugeot->Peugeot v30.71->BSI->Manual Select->JC BSI2004-HOX

Turn ignition switch on

Select Read EEPROM function

Reading data

Save eeprom dump

Click Read Flash function

Save flash data

Select Mileage Adjustment (Mileage Correction) function

Make sure you have read & saved eeprom and flash data before change km

Press YES to continue

It will take 2-60 minutes to test, keep the vehicle fully charged and don’t unplug the OBD onnector

Communicating

OBDSTAR X300 DP read current mileage on BSI

Press YES to confirm

Enter the mileage you desired

Turn ignition off

Reset Puegeot BSI mileage success.

http://www.obdii365.com/service/peugeot-bsi-hc05-2004-mileage-reset-by-obdstar-x300-dp-97063.html

2018/01/19

OBDSTAR X300 DP change mileage on Audi A3 2016 MQB system

OBDSTAR X300 DP (Key Master DP) tablet key programmer free updated VAG MQB 2014.6- system odometer correction for free in Jan. 2018. Here we test it on a Audi A3 year 2016 MQB system successfully.

Disassemble the dash