OBDSTAR X300 Pro3 Replace AUDI Q5 Brake Pad

When car owners feel that brake is not very sensitive, for safety, should consider brake pad needs to be replaced. Here share how to replace AUDI Q5 2010 Brake Pads with X300 Pro3 tool.

Vehicle model example: AUDI Q5 2010

Tool needed: OBDSTAR X300 Pro3 Key Master

Audi Q5 Rear Brake Pads Replacement with EPB:

Firstly choose “Function Selection”→“EPB Brake Pads change”→select the car model “AUDI”

Select car model “AUDI (EPB)”

Insert the key and turn the ignition switch to ON, do not start the vehicle. While releasing the handbrake! Press [ENTER] to continue…

Here choose “Replacing the rear brake pads”

 Brake cylinder is retracted…

 Brake cylinder has been retracted, replace the rear brake pads! And restore the brake cylinder to vehicle after the rear brake pads been replaced completely and press [ENTER] to continue…

 Brake cylinder being released, wait for a while and press [ENTER] to finish this step.

 Press [ENTER] to exit system, Close and reopen the ignition switch.

Brake has been replaced successfully!

Free OBDSTAR Tools Register and Update Manual

Original OBDSTAR Tools (OBDDSTAR X100 PRO,X300 Pro3 Key Master,F100,F108,VAG-PRO etc)software can be updated online. They share the same registration and upgrade procedure.


How to register OBDSTAR Tools?
1. Power on the OBDSTAR device

2.Go to "ABOUT" and press "ENTER"

3. Check the device information (Serial Number, register password etc)

4.How to tell original OBDSTAR Tools from clone? You can press "F1" and "F2" buttons at the same time, the device will show a secret number. Send the number to factory or authorized dealer to confirm your device is real or fake.

5.Go to OBDSTAR official website www.obdstar.com to register 

Enter user information and sign in.

 6. Enter product serial number & register password got from Step 4.
Enter the distributor code/dealer code software show you.

Finally, click”Next step” and type your own information.

How to Update OBDSTAR Tools?

1. First register and login official website follow above procedure. 

 2. Select "DownCenter" menu

3. Download the obdstar update tool

4.Upzip and install update tool

 5.Select software you need to update and download in bulk

6.You need to unzip these 2 files shown is picture below:

7. Update in progress

http://obdstar.blogspot.com/2016/06/how-to-update-obdstar-x300-pro3-key.html

How to update OBDSTAR X300 Pro3 Key Maker software

The SKP900 and OBDSTAR X100 Pro replacement-OBDSTAR X300 Pro3 Key Master key programmer software can be free updated online for 1 year. Here is the instruction on X300 Pro3 software upgrade.

How to update OBDSTAR Key Master  X-300 Pro3 software?

1. Update Tool software installation

Download the update tool and diagnostic software on www.obdstar.com, double click , then go to the next step:

Step 1：Click “Next”

Step 2: Click “Next

Step 3: Click “Next”

Step 4: Click “Finish”

2. Software Updating

After Update Tool installation completed, click the Update Tool software icon on desktop to start the update tools. Operation steps as following:

     Step 1：Open update tool

Step 2: Click the source menu, choose the program you want to update, click it and confirm

Step 3: Click and select all the software then click “update”

Step 4: Wait for several minutes then the updating finished

Note：For new update software and questions during updating, please contact obdii365.comcustomer service.

http://blog.obd365.com/2016/06/02/update-obdstar-x300-pro3/