OBDSTAR X300 DP Plus Add Key Renault Trafic 2017

 Does OBDSTAR X300 DP Plus do Renault trafic 2017 keyless card all keys lost situation?

 

Impossible all keys lost. Obdstar works on Megane 4, Talisman, Scenic 4 etc all keys lost, but not for Renault traffic unless you use another machine.

Renault Trafic 07.2017 ID49 4A new spare keyless card smart key is done by OBDSTAR X300 DP Plus software V31.22 via OBD.

 

Preparation:

The function requires network connection.

The green Renault gateway converter is required.

Here is an example on adding a spare key.  The customer had a working key, I made a second key only.

 

 

Procedure:

1). Read Pflash

In X300 DP plus, go to Renault/Dacia- software V32.22- Manual Select Model- Renault- Trafic- 2014 up-

Read immo information

OBDSTAR detects 2 keys exists

Read the programming prompts

Turn on emergency fash, turn off the ignition switch
Turn on ignition with a working key

Read pflash

Save flash data

Obdstar x300dp plus will ask if the current model is a post-2018 model, press Esc

2) Read Password 

communication with vehicle and loggin

turn on ignition with working key

Erase and write flash, don disconnect device from vehicle

Read 32-digit password success

 

3) Program keys

the function will erase all keys.  maximum 4 keys can be programmed.
remote is automatically generated after key programming is completed
turn ignition on
turn ignition off

enter 32-digit pin to continue
insert a working key to turn on the ignition
program 1st key success

insert a new key to be programmed and turn on the ignition
2 keys programmed

turn off the ignition switch to complete programming

2 keys have been programmed successfully

Test new keys.

 

What tools can do Renault Trafic 2014- all keys lost?

Autel IM508/IM608

Autel and Xtool is good for Renault smart card.

Review 1:

Renault Trafic 2020 all keys lost success with im608. Blade key, 10mins job with external power.
Checking (reading) flash, read pin 32 digits, programming key, all in 10min. Choose option 1 fast reading and programming. Autel 608 give 3 option.

2:

2019 Renault Traffic 4A chip

Took about 25 minutes to read Pflash Data and extract the mega long pin code

3:

2016 Renault traffic completed. Took 3.5 hours to read p flash and then re-load for the security code. After that took 1 minute to load keys. Used an aftermarket remote. Had 2 options for pflash. I chose from vehicle. All good.

Xtool can only read PIN and add key Trafic pre-2014 only.

 

Read also:

How to Get PIN Code when Bricks Renault 2015+ 4A System UCH?

Program Renault Logan 2018 AKL with OBDSTAR X300 DP Plus

 How-to: program Renault Logan 2018 UCH JOHNSON all keys lost with obdstar x300 dp plus and Renault converter (the green adapter).

 

 

Connect both OBDII 16 and Renault converter with x300 dp plus and vehicle

Select IMMO- Renault – V30.99 – Program Keys – Logan – 2013 up – Type 2 – All Keys Lost – Read DFlash

confirm the deletion of all keys

there will be the risk of reading failure because of no Pincode in UCH of very few models, if risk has occurred, use OEM device for programming.
After the OEM device is successfully programmed, the PinCode will be automatically written into UCH.
Afterward, this vehicle will support PinCode reading when our equipment is used.
turn on ignition switch

Resetting UCH
reading data
save Dflash

Select Program Keys
This function is available by connecting the server, enable the Internet connection.

Make sure the connection is good

select Dfalsh just saved and press Enter
if x300dp plus ask do you have an original key, press No because lost all keys

connect p001 adapter with x300 dp plus and insert new key to be programmed into p001
making key in procedure

failed to generate dealer key

Select Program Keys and repeat again.

confirm erase all existing keys

insert the key to be programmed and turn on the ignition
switch ignition ooff
insert the key to be programmed and turn on the ignition

program current key successfully.
switch ignition off

program complete.

http://www.key-programmer.org/2021/07/01/program-renault-logan-2018-all-keys-lost-with-obdstar-x300-dp-plus/

Clio IV 2018 all key lost possible with obdstar x300 dp plus?

Renault Clio IV 2018 all key lost possible with obdstar x300 dp plus and how?

The answer is yes, obdstar dp plus can program Clio IV 2018 all key lost perfectly.

obdstar x300dp plus Renault Clio IV 2018 all key lost operation guide

procedure can be applied to Clio4 from year 2016 to 2019

*Check also: OBDSTAR X300 DP plus Renault AKL model list & feedback

Tap Immobilizer->Renault->Program Keys ->Clio

2016- 2019

Please connect the OBDII-16 and Renault converter at the same time, otherwise make the dealer key failed!

If there is no Converter, please refer to the help instructions!

This function is available by connecting server, please ensure the internet connection is normal.

All keys lost.

Notice:

1. If all keys are lost when programming, you need to connect the Converter connector. Otherwise, the dealer key is generated failed. The connection method is as follows:

2.When adding a new key, program the new key first;

3.If perform “Add Keys” operations, you need to read and write the IMMO ECU data. It takes about 90 minutes.

Please ensure that the vehicle battery is fully charged before execution. The instrument will be in a black screen during data reading and writing.

4.All keys need to be programmed, and the keys not programmed will be erased;

5.The positions of the key card slot and OBD II diagnostic socket are as follows:

6. Next is to have the menu:

Read DFlash

Make dealer key

Program keys

Unlock key

7. Follow on-screen instruction until succeed.

www.obdii365.com