Original OBDSTAR Tools

2016/08/10

OBDSTAR X300M Odometer Correction Tool Review

OBDSTAR X300M odometer correction tool adopts ARM high speed chip to keep it running fast, stable and anti-jamming.

The x300 m box

Package receipt

X300 M user's manual

X300M main unit with SD card - front

OBDSTAR X300 M - side

OBDSTAR X300 M- back

OBDSTAR X300M - bottom

Main cable

OBDII-16 connector

SD card reader

And some test customer did so far (all via OBD directly):

Skoda Octavia 2010 nec+24c32 VDO mileage OK

Audi A4 2007… in 20 seconds by OBD

Kia sportage 2013 round dash screen obd success

Range Rover Evoque SD4 2013 ok less than 2 seconds

Range rover sport 2014 , 10 sec after buckup all ok

2016/08/08

OBDSTAR F100 Program Mazda CX-5 all smart key lost

Here is the step-by-step guide on programming key for Mazda CX-5 by using OBDSTAR F100 Ford/Mazda key programmer.

Top 5 reasons to get OBDSTAR F-100:

1.Support both Ford/Mazda key programming (all key lost) and display data stream

2.No pin code required.

3.Support the new Mazda CX-3,CX-5,Mazda 2/3/6

4.Support part of Ford/Mazda/Jaguar/Land rover odometer correction

5.Original OBDSTAR product,update online

Very easy to operate; just follow the screen instruction.

Models:

Mazda cx5

Tools to use:

OBDSTAR F-100 key programmer

2 spare keys to be programmed

Mazda key programming procedure:

Select FUNCTION

Then IMMOBILIZER

Select Mazda CX-5

With Smart

Communication...

Switch ignition on

Put all the smart keys out of the car 1 meter away

Communication...

Press and hold the vehicle start button for 10 seconds, Start the button indicator li...

Select Add smart key lost

Instruction:

All smart keys should be erased; MIN keys are required; Press ENTER to continue, press ESC to return

Switch ignition on

Communication...

Current number of key smart: 2; Press ENTER to continue, press ESC to return

Configuring the system,please wait...

Reading vehicle information...

Configuring the system,please wait...

Current number of keys: 0

Erase complete

Configuring the system,please wait...

Switch ignition off

Configuring the system,please wait...

Switch ignition on

Use a new smart key to contact start button for a while until configuration complete, press ENTER to continue

Configuring the system,please wait...

Current number of keys: 1

Program success!

Same way to program another:

Switch ignition off

Configuring the system,please wait...

Switch ignition on

Use a new smart key to contact start button for a while until configuration complete, press ENTER to continue

Current number of keys: 2

Program success! Press ESC to return

You have completed the following procedures, engine can be started:

1- switch ignition off

2- put on the brakes, the key 1 press start button to start the engine for 3 seconds, then turn off the ignition switch

3- if you want to add more keys, please repeat procedure 2, complete

Finally, test the new keys to check they can work

Thus,

Mazda cx5 smart key programming success.

More info:

FORD & MAZDA models list F100 key programmer supported:

Mazda CX-3 ( 2015+ )( smart PCF7953 ID46 )

Mazda CX-5 ( 2012+ )( smart PCF7953 ID46 )

Mazda 2 ( 2014+ )( smart PCF7953 ID46 )

Mazda 3 ( 2013+ )( smart PCF7953 ID46 )

Mazda 6 ( 2013+ )( smart PCF7953 ID46 )

Mazda 2 ( 2002 – 2013)( 4D ID63 )

Mazda 3 ( 2002 – 2012 )( 4D ID63 )

Mazda 5 ( 2002 – 2012 )( 4D ID63 )

Mazda 6 ( 2014 – 2012 )( 4D ID63 )

Focus3/CMax 2010+ – mechanical ( DST80+ )

Focus3/CMax 2010+ – proximity ( DST80+ )

Kuga2 2014+ – mechanical ( DST80+ )

Kuga2 2014+ – proximity ( DST80+ )

MondeoMK4/SMax facelift 2010+ – mechanical ( DST80+ )

MondeoMK4/SMax facelift 2010+ – proximity ( DST80+ )

Fiesta 2014+ – ONLY mechanical ( DST80+ )

BMax+ – ONLY mechanical ( DST80+ )

Custom – ONLY mechanical ( DST80+ ) ( not fully supported )

NON-supported ( soon, look for news ):

Fiesta 2014+ – proximity

Bmax – proximity

Ecosport – proximitywww.obdii365.com