OBDSTAR Program Toyota 2021- 4A Proximity without PIN

 OBDSTAR recently release an important update adding Toyota Corolla/Levin 2019/2021 onwards proximity key programming (add key and all keys lost) bypass PIN code.

 

Device required:

OBDSTAR X300 DP Plus/X300 Pro4/Key Master DP Plus/Key Master 5

OBDSTAR CAN Direct Kit

 

Functions

2019- COROLLA 4A proximity key programming(free pincode);

2021- COROLLA CROSS 4A proximity key programming(free pincode);

2021- COROLLA CROSS HV 4A proximity key programming(free pincode);

2021- COROLLA SPORT 4A proximity key programming(free pincode);

2021- COROLLA SPORT HV 4A proximity key programming(free pincode);

2021- COROLLA TOURING 4A proximity key programming(free pincode);

2021- COROLLA TOURING HV 4A proximity key programming(free pincode);

2021- COROLLA HV 4A proximity key programming(free pincode);

2019- LEVIN 4A proximity key programming(free pincode);

2021- LEVIN HV 4A proximity key programming(free pincode);

2021- ALLION 4A proximity key programming(free pincode);

2021- LIVIN 4A proximity key programming(free pincode).

 

TOYOTA 4A PROXIMITY KEY PROGRAMMING (FREE PINCODE)

Step-by-step procedure:

1. Read IMMO data (on BENCH)

Connect OBDSTAR X300 DP Plus / KeyMaster DP Plus to a car, enter into [CAR IMMO]- [All] – [LEXUS TOYOTA SCION]- latest software version-Manual Select Model- Toyota – Asia- COROLLA- PROXIMITY- 2019-

Read Immo data (Bench)

Connect the obdstar key programmer and smart key ECU through the jumper cable, power the device, click [Enter].

Tips: press [Guide] to check wiring diagram in details.

The function requires a network connection. Ensure the internet connection is normal, click [Enter].

Save file name, save and confirm

Read immo data success, click [Enter].

Tips: the file folder position saved: DP-device serial number-Data

 

2.Add keys

Click [Add keys]

Make sure internet connection is normal, click Enter

Note: Less than 6 keys can be programmed. Pls complete all steps within the specific time, click [Enter].

 Switch ignition on

Turn on the emergency flasher, shut off the ignition

Press Enter to confirm you have read vehicle immo data

Upload  IMMO data read in step 1 and confirm

Follow obdstar prompts to complete key programming.

1.put the key to be programmed close to the Start button and buzzer will beep once

2.put the key to close to the Start button and buzzer will beep twice or once

Program successfully. If remote control doesn’t work, pls execute [Program ID Box With Steering Lock] procedure.

http://blog.obdii365.com/2021/12/17/obdstar-program-toyota-2021-4a-proximity-all-keys-lost/

OBDSTAR X300 DP Plus Add Ford EcoSport 2018 Key

Test report: obdstar x300 dp plus Ford Ecosport 2018 add key (ID49) successfully with the new AKL harness. 

I selected slow method . Read D flash and P flash but don’t forget battery stabilization cause reading the flashes took about between 5-10 min.

Then add key , put new key in the central glovebox and follow the steps.

Hope this will help you guys ! 

OBDSTAR Program 2019 Nissan Qashqai All Keys Lost by OBD

 Surprised! Nissan Qashqai 2019 all lost keys done successfully with obdstar x300 pro4 thru obd. No risky works fine.  OBDSTAR X300 DP Plus can do this as well.

 

Open door with lishi nissan auto pick and decoder

Connect obdstar with vehicle thru obd socket

in X300 Pro 4, go to  Nissan/Infiniti-Latest version-Manual Select System-20 Digit Pin Code- Proximity- Select from vehicle- Qashiqai- 2017 onwards-Program smart keys

Turn off the ignition, open the emergency switch

OBDSTAR detected BCM code
Always check OBDSTAR warning if BCM is under the blacklist, this BCM is safe, press Enter to continue
Close all doors
Open the door once

All keys will be erased.
up to 4 keys can be set
if you have original keys, program original key first

Press the start button, the indicator flashes on the start button, 5 seconds with 1th smart card logo on the center of the start button, instrument automatically turns on

Switch ignition off

Program success

Tap the start button with the marker side of the first proximity key, then release it and attach it to the start button until the ignition is on and the buzzer beeps
Switch ignition off
Program completed

Test key type and frequency with mini cn900

Type 7A HITAG AES

434MHz

Replace with a new good battery

Test remote control and start vehicle with the new key.

Done.

www.obdii365.com

OBDSTAR Program 2011 VW Golf 6 All Keys Lost

 VOLKSWAGEN GOLF 6 year 2011 24C32 all keys lost programming done via OBDSTAR X300 DP Plus

Read EEPROM ok

Make dealer key ok

Learn Key ok 

OBDSTAR Adds 2019-2021 Toyota Corolla Levin 4A Proximity

 OBDSTAR released new Toyota immobilizer software V32.60 on Nov. 30th, 2021.

Add 4A proximity key programming (Free pin code) for following vehicles.

Function:

• Read IMMO data(BENCH)
• Make simulated card(Key SIM)
• Add keys
• Erase keys
• Reset smart box (all keys lost)
• Program ID box with steering lock

applied to obdstar x300 dp plus, x300 pro4, key master dp plus and key master 5

affected models:

2019- COROLLA  Chassis MZEA11, MZEA12, NRE210, ZRE

2021 COROLLA CROSS

2021 COROLLA CROSS HV

2021 COROLLA SPORT

2021 COROLLA SPORT HV

2021 COROLLA TOURING

2021 COROLLA TOURING HV Chassis MZEA11

2019- LEVIN Chassis MZEA11, NRE210, ZRE

2021 LEVIN HV Chassis ZWE211, ZWE

2021 LEVIN

2021 Allion

 

Remarks:

1. Works with Key SIM & multi­functional jumper;

2. Two methods for all keys lost

Method 1: Add a new key via Key SIM (no risk);

Method 2: Reset smart box to program a new key (the original key will be erased);

3. If remote control doesn’t work after adding a new key, pls execute Program ID Box With Steering Lock.

OBDSTAR Adds 2019- Toyota 4A Proximity Key Programming

 OBDSTAR released new Toyota immobilizer software V32.58.  This version adds 4A proximity key programming (Free PIN code).

 

Models:

Toyota 2019- Corolla, Corolla HV, Levin, Levin HV

Function
Read IMMO data (Bench mode)
Makke simu;lated card (via Key SIM)
Add keys
Erase keys
Reset smart box (all keys lost)
Remarks: Works with Key SIM & multi-functional jumper

 

This update can be applied to OBDSTAR X300 DP Plus, X300 Pro4, Key Master 5 and Key Master DP Plus

Program Kia Soluto 2020 Remote Key by OBDSTAR

Here is the guide to program Kia Soluto 2020 2021 remote key with obdstar x300 dp plus. You can generate remote with either vvdi mini key tool or keydiy under Morning option, then program remote control with obdstar.

We generate remote with keydiy remote

You go to Kia, latest software version- Select from type- Remote system- 16-PIN -Type 3- Program Remotes
Turn on ignition switch

turn on ignition switch, then switch ignition off and remove key

Program remote, press LOCK or UNLOCK for more than 1 sec

program success
program next remote

Test both keys, car starts, remote control works.

www.obdii365.com

http://www.key-programmer.org/2021/11/10/program-kia-soluto-2020-2021-remote-key-by-obdstar-x300-dp-plus/