OBDSTAR X300 DP Plus Freeze Boot Logo Solution

 Here’s the solution to OBDSTAR X300 DP plus screen freezes boot logo flashing and non-responsive status problem.

Solution:

Flash the x300dp plus.

Contech obdii365.com to download reflash boot files.

 

How to flash obdstar x300 dp plus?

Paste reflash files to a SD Card (paste files but not a folder).

Insert SD card to x300 dp plus. Press “+” and shutdown button at the same time until “SUCCESSFUL” message appears.

Then long press the shutdown button to turn device off. Press power on and volume + button at the same time to enter reflashing mode. Wait until flashing completed.

Reboot the device, connect device with internet, login with user name and password. It will back to normal again.

How to Exit Skoda Octavia 2017 Learning Mode?

 Problem:

I have added keys to skoda octavia 2017 with xhorse vvdi key tool plus and car is still in learning mode. Try to reset instrument cluster, but still no working. Is any way to exit this mode?

Solution:

Use another tool- OBDSTAR X300 DP Plus as long as you can read immo and eeprom data.

She is good at this job.

 

Feedback:

obdstar done job without any issue.

Just program keys as normal and it finished procedure like should be. for some reason key tool plus could not end the learning stage even if all keys had been recognized.

OBDSTAR Big Toyota Software V32.74 Update

 OBDSTAR X300 DP plus and x300 pro4 released new TOYOTA & LEXUS IMMO software V32.74 on Non. 24th, 2022.

 

Supports over 90% TOYOTA/ LEXUS vehicles proximity key programming(all keys lost);
Supports vehicles with gateway read smart key ECU IMMO data by OBD (world first released, no need any adapters).

1. Add 2018- proximity(8A-A8) all keys lost(free pincode) for below models:
• TOYOTA CROWN

• TOYOTA LAND CRUISER
• TOYOTA HIGHLANDER(petrol)

• TOYOTA PRADO

2. Add 2018- proximity(8A-A9) all keys lost(free pincode, smart key ECU with 24 pin) for below models:
• TOYOTA ALPHARD

• TOYOTA VELLFIRE

3 .Add proximity(8A-A9) key programming(free pincode, smart key ECU with 27 pin)
4 .Add proximity(8A-AA) key programming(free pincode, smart key ECU with 27 pin)
5 .Add proximity(4A) key programming(free pincode, smart key ECU with 27 pin)
6 .Add read smart key ECU IMMO data by OBD for below models(more models in testing):
• TOYOTA ALPHARO
• TOYOTA CAMRY
• TOYOTA C-HR
• TOYOTA CROWN
• TOYOTA HIGHLANDER
• TOYOTA IZOA
• TOYOTA LAND CRUISER
• TOYOTA LC200
• TOYOTA PRADO
• TOYOTA PRIUS
• TOYOTA RAV4
• TOYOTA VELLFIRE
• LEXUS LC
• LEXUS LC570
• LEXUS RX series
• LEXUS RX450H

Remarks:
1. Functions above need to work with CAN Direct Kit & Key SIM.
2. All TOYOTA simulated cards work well.
3. Key SIM supports DST40-94/DST40-D4, DST80-98, DST80-F1, DST80-78, 8A-88/8A-A8, 8A-A9, 8A-39, 8A-AA, 4A, Toyota H(Blade 8A).

4. Toyota-24 cable is not included in the CAN Direct kit (need to purchase addtionally)

OBDSTAR Toyota RAV4 2021 8A Proximity AKL Bypass PIN

 With the CAN Direct kit you are able to program latest Toyota 8A/4A smart key (add key and all keys lost) with obdstar x300 dp plus without a passcode. Here we successfully generate a simulator key of 2021 Toyota RAV4 to program key.

 

Device used:
OBDSTAR X300 DP Plus/Key Master DP Plus
Key SIM emulator
OBDSTAR CAN Direct Kit

Remark: Always check CAN Direct kit compatible list below operation.

 

Procedure

Connect CAN Direct cable with OBD
Connect the Toyota 27 cable with smart box
Go to Immobilizer->Asian->Toyora/Lexus->Latest software version->Manual Select System->Proximity->Type 9 (8A-AA)

Read immo data-> operation in car with CAN Direct kit

This function requires network connection to access server

Reading immo data

Save immo data

Select Make simulator key (Key Sim) function

Select immo data just saved

connect key sim with x300 dp plus

Generate simulator key successfully.

Restore smart box cable.
The emulator key can start engine now.

You can perform add key or all keys lost with the immo data.

 

Read also:

OBDSTAR Program Toyota 2021- 4A Proximity All Keys Lost Free PIN Code