How to Update OBDSTAR P50 Airbag Reset Software?

 The procedure to update OBDSTAR P50 airbag reset tool software is the same as Odomaster.

 

Note: Keep charging and connect to the network before registering & upgrading

1. Click DP

2. Click Personal center

3. Click Register

4. Fill in user information

5. After successful registration, log in to your account

6. Click upgrade

7.Select software to update

https://www.obdii365.com/service/update-obdstar-p50-software.html

OBDSTAR MT200 Radio Pinout on Bench

OBDSTAR MT200 will decode Ford, VW, Skoda radio code by OBD or Bench. 

Here are some radio bench pinouts. You can check pinout in OBDSTAR App as well.

FORD-Visteon 6000CD(NEC70F3357)

FORD-Visteon 6000CD(TMS470)



FORD-Visteon Sony(NEC70F3357)



FORD-Visteon Sony(TMS470)


FORD-Visteon Sony 6CD(TMS470)

SKODA-Visteon Audience


SKODA-Visteon Stream


VW-Visteon RCD300

https://www.obdii365.com/service/obdstar-mt200-radio-pinout.html

Program Renault Captur II 2019- AKL by OBDSTAR or Autel

 Renault captur 2 2021 4A smart card (AES chip proximity card) all keys lost can be done?? What device to use?

 

OBDSTAR: Yes 

OBDSTAR engineer confirmed x300 dp plus/x300 pro4 will add key and do all keys lost for Captur II 2019-.

Update Renault version to latest.

You may need Renault gateway adapter to bypass pin.

Battery support on.

Used adapter and stable internet.

With Key Master DP / DP Plus, Captur makes flash reading and writing after 2015 while making a key. The device will tell you the procedure you need to follow. With the new version, all keys lost in Clio 4, Captur, Megane 4, Kadjar etc. have been added. This feature is currently not attached to any device (Abrites, Zedfull etc.).

Flash says you need to remove the key after reading and writing, then you need to insert the same key again. If you insert a different key, an error occurs. After getting an error, start the process all over again. This time it will not read flash. Because you’ve done it before. You should start processing with the new key. The result will be successful.

 

 

 

Autel: 

Autel MaxiIM IM508/IM608/IM608Pro will only add key (blade and smart) for captur 2 2019-, cannot do all keys lost.

For some models, the gateway must be unlocked for the execution of the function.
Gateway unlocking is not directly related to PIN reading.

For a small number of models, PIN code reading may fail. In this case, you can ask a third party to verify the PIN code to complete learning.

 

There are two ways to unlock the gateway.

Auto unlock via OBD (this is chargeable. You may need to redo the payment after learning failure) and manual unlocking (a dedicated gateway connector is required).

If the auto lock via OBD fails, you will enter the manual unlock process. You can unlock it manually by referring to the user guide.

 

Here is an example of add a spare key to Renault Captur 2 2020.

Function requires network connection.

Connect IM608 with vehicle
Select Renault-> Auto Selection-> Detect VIN->Smart Key

Confirm vehicle information

Immo status scan
Add key (Guided)

Pay for the unlock service $8.8 via paypal.

Then

Reading the PIN code
Get VIN

Program key

 

 

SmartPro: Yes

With Renault Bypass Cable ADC2017 you can program Captur II all keys lost.

The bypass cable allows locksmiths to programme safely new proximity keys for the
Renault* Clio V, Captur II and Zoë models from 2019 onwards.
The cable connects the Smart Pro directly to the vehicle’s Body Control Module (BCM) bypassing the secure gateway module. The two 40 pin connectors, male and female,
plug directly into the BCM whilst the two 16 pin connectors are used to connect the Smart Pro to the vehicle OBD if power is needed.

How to Combine OBDSTAR Tools to OBDSTAR App?

 OBDSTAR App provides car, motorcycle and marine maintenance and repair guides for OBDSTAR tools.

 

Here is the instruction on combining obdstar tools with OBDSTAR App.

First of all, download and install OBDSTAR App by scanning QR code here.

For Android system at present. iOS App is under development.

 

How to Combine OBDSTAR Tools with App?

Power on OBDSTAR tool
Connect device with WiFi

Go to Settings->Device QR code

Then run OBDSTAR App, click me icon->My device
Select Device Binding and scan the QR code on your OBDSTAR device

Scan QR code to confirm device information
Check if device serial number is the same

Then press “To Bind” to combine device with App
Combine device successfully

Now you will see your device in OBDSTAR App.

https://www.obdii365.com/service/download-obdstar-app-and-combine-obdstar-tools.html

OBDSTAR P50 Reset Nissan kicks 2019 Airbag

OBDSTAR P50 is a dedicated airbag reset tool servers more than 4,000 modules of airbags. 

Here we reset Nissan Kicks 2019 airbag, part number 28556-5RB0C (Bosch) 95640.

Select Airbag latest version

You have the automatic detection option. You can choose manual function by entering part number if you have. 

Auto detection requires network connection.

P50 read the part number here: 285565RB0C, press Enter to continue. 

Select Nissan 28556-5RB0C (Bosch) 95640

You can check operation instructions and pinout in OBDSTAR P50

Connect P004 adapter and jumper with airbag module follow the diagram on bench

Read ECU information 

Now you can read fault, clear faults and erase the crash.