OBDSTAR X300 DP Plus Program Opel Adam 2013- Key

Opel adam 2014 add key success using OBDSTAR X300 DP Plus key programmer.
Read 4-digit pin code no problem.
Program key succeed.
15 min job.

OBDSTAR X300 DP Plus failed to Program Nissan Qashqai 2015 Key?

Problem:

My client asked to add a new key to his Nissan qashqai 2015.  I followed the OBDSTAR X300 DP Plus operation, everything is OK.  I touched the Nissan logo on the start stop button and immediately turned on the dashboard. later he asked me for another key (3) i did the same procedure but this time do not add any key. beeps and does nothing. with the new key the buttons still open and close the doors but when I try to get the car to work it says to turn the wheel and press the start-stop and do nothing. but I hear a noise like a click coming from the fuses. at other times key id fault appears. Any ideas?

 

BCM type

Here attached some operation photos

Suggestions & Solutions:

Your BCM is in black list.

You should not ignore the OBDSTAR warning message.

"Do not perform key programming on BCMs with part number: 284B1-4CB1A or 284B1-4CB0A or 28B4B1-4BY1A"

These BCMs are in black list.  OBDSTAR won't be able to program keys for these BCMs.

the list has grown since last listed , bcms that carry a risk include:

4B0A
3ZP0A
4CB1A
4CB2A
4CB3A
4CB4A
4CB5A
4CE1A

 

Tips on Nissan BCM key programming:

1) Always use battery support to maintain voltage at around 13.8 volts , battery support not booster or jump leads.

2) Always read the bcm serial before doing anything , if on the list you then decide if its worth the risk knowing what it will cost if it goes tits up , in fact even if not on list you decide if worth the risk.

3) if having a punt on it , just code in the original key on its own first , if it goes back in with no issues , you then decide again if worth the risk , if it doesnt go in then you have killed it

 

 

If already bricked the BCM,  here's some solutions:

1) Few months ago i passed like u now but i paid 550 for AVDI Nissan key programming and solve my problem online programming
In my opinion BCM is learning mode check for someone in your region with AVDI with nissan module activate or any other to help you first.

 

2). Dealer changed BCM, ECU and ELV + keys. From few experience around 2500euro from your pocket.

 

 

FYI:

OBDSTAR X300DP plus supported Nissan Qashqai list

If the BCM is not in the blacklist,  keep enough power supply and follow x300dp prompts until finish.

Area

Model

Key Type

Year

Show key count

Pin Code Read

Add Keys

All key Lost

Program Remote

 

AFRICA	QASHQAI	BLADE	2009-2014		✔	✔	✔	✔
ASIA	QASHQAI	PROXIMITY	2008-		✔	✔	✔	✔
AUSTRALIA	QASHQAI	BLADE	2013-2017		✔		✔	✔
AUSTRALIA	QASHQAI	PROXIMITY	2013-		✔		✔	✔
EUROPE	QASHQAI	BLADE	2014-2018		✔		✔	✔
EUROPE	QASHQAI	BLADE	2009-2013		✔	✔	✔	✔
EUROPE	QASHQAI	BLADE	2007-2009		✔	✔	✔	✔
EUROPE	QASHQAI	PROXIMITY	2008-2013		✔	✔	✔	✔
EUROPE	QASHQAI	PROXIMITY	2014-		✔		✔	✔
MIDDLE EAST	QASHQAI	BLADE	2009-2014		✔	✔	✔	✔
SOUTH AMERICA	QASHQAI	PROXIMITY	2014-		✔		✔	✔

 

 http://www.key-programmer.org/2020/08/07/obdstar-x300-dp-plus-kills-nissan-qashqai-2015-bcm/

OBDSTAR X200 Pro2 vs. X200 Pro Oil Reset Tool

OBDSTAR X200 Pro2, released in 2020, is much better than X200 PRO in hardware configuration, newest vehicle coverage, more special functions etc.

OBDSTAR X200 Pro2 vs. X200 PRO:

Item	OBDSTAR X200 Pro2	OBDSTAR X200 PRO
Image
Released year	2020 year	2015 year (discontinued)
Operation system	Android 5.1.1 tablet	Hand-held
Specification	Quad-core processor,runs fast and stable; 5-inch capacitive high-definition touch screen ; Support Wi-Fi wireless network connection	Dimension: 192mm(L) *93mm(W) *29mm(H) CPU: ARM7 Power Supply: DC12V Operation Power：DC12V Operating Temperature: -10-60℃ Display Screen: 160×160 TFT Screen
Oil Service Reset	Yes	Yes
EPB (PBM)	Yes	Yes
OBDII diagnosis	Yes	Yes
ABS bleeding	Yes	No
Battery match	Yes	No
CVT learning	Yes	No
DPF	Yes	No
Gear learning	Yes	No
Oil Nozzle	Yes	No
Steering	Yes	No
Sus reset	Yes	No
TPS	Yes	No
Vehicle coverage	Supports most of the models on the market and covers 2020 new models,such as Mercedes-Benz, BMW, Porsche, Volvo, Land Rover, Jaguar, Renault, Peugeot, Citroen, DS, Maserati, Aston Martin, Volkswagen, Audi, Skoda etc	Not cover vehicles to 2020 year
Update	One-click wireless network upgrade, the user upgrade prompt function will be more convenient and fast.	Long in official site and click “One key Upgrade” to download the update tool and diagnostic software to upgrade.
Help guide	With built-in graphic guide help function	With simple on-screen instruction
Language	English	English

OBDSTAR X200Pro2 improvements:

More compact: 5 inch high-definition touch screen, moderate size, easy to operate

More stable: comprehensive upgrade of software and hardware, equipped with Android operating system

More convenient: one-click upgrade, self-update, with upgrade prompt function

OBDSTAR X200 Pro 2 function menu:

This is X200 Pro 2 home menu.

After entering “Diag program”, have options “Oil /service reset” and “Other function”.

After entering “Oil / service reset” and have options: America, Europe, Asia, China.

After entering “America” and have car makes to select.

European vehicles.

Other functions.

Enter settings and have VCI information, language, unit, users information, about, DC calibrate etc.

Enjoy!

www.obdii365.com

OBDSTAR X300 DP Plus Read GMC 2017 Denali PIN Code

Test feedback:

GMC 2017 Denali. 4-digit PIN Code reading and smart key programming on OBDSTAR X300 DP PLUS.
Generate remote with xhorse remote and remote maker.
Pin code reading requires network connection via WiFi.

OBDSTAR X300 DP Plus Clone BCM for Opel 2011 Insignia

One of the main reasons I bought the OBDSTAR X300 DP plus (C package) was to do the Opel 2011 Insignia BCM clone the same as in the video.
https://youtu.be/WIwvJ1_tEew
So successfully done this today!
leave module connected in car, battery charger on the battery and ignition off.
Plug into obd port
Read eeprom
Read flash
Swap bcm
Write eeprom
Write flash
Took a lot longer than in the demo video of it on YouTube so definitely need battery charger on the car.
Also needs internet connection to do it.

www.obdii365.com

 

OBDSTAR PSA Dash and BSI Odometer Correction Manual

OBDSTAR tools (X300 DP Plus & Odomaster) PSA Peugeot Citroen DS odometer correction vehicle coverage and instructions.

Part 1: Mileage Correction Coverage 

OBDSTAR supports following PSA odometer correction car list:

PEUGEOT
BSI
Auto Select
Manual Select

Continental SC67050 + 95256 CAN (BSI-Q0X-00)
JC easyCAN4F1M-32 + 95128 CAN (BSI04EV-K0X)
JC easyCAN4 + 29LV400BB + 95128 CAN
JC SPC560B60 + 95128 CAN (BSI04EV2-KEX)
SIEMENS 1L00M + 95128/95256 CAN (BSI-S0X)
SIEMENS D76F0018 + 95160 KLINE (BSI-E0X/BSI-F0X)
VALEO SC667152 + 95256 CAN (BSI-N0X)
VALEO 2M48H +24c128 CAN (BSIEV-X0X-00)
VALEO 4L00M + 95128/25128 CAN (BSI2004-P0X-00)

DASHBOARD
Boxer 2015
208
2008
C-ElySee
3008
308 2014-

2008

301
5008
508

CITROEN

BSI
Auto Select
Manual Select

Continental SC67050 + 95256 CAN (BSI-Q0X-00)
JC easyCAN4F1M-32 + 95128 CAN (BSI04EV-K0X)
JC easyCAN4 + 29LV400BB + 95128 CAN
JC SPC560B60 + 95128 CAN (BSI04EV2-KEX)
SIEMENS 1L00M + 95128/95256 CAN (BSI-S0X)
SIEMENS D76F0018 + 95160 KLINE (BSI-E0X/BSI-F0X)
VALEO SC667152 + 95256 CAN (BSI-N0X)
VALEO 2M48H +24c128 CAN (BSIEV-X0X-00)
VALEO 4L00M + 95128/25128 CAN (BSI2004-P0X-00)

DASHBOARD
C3 2009
C3-XR
C4 2010-
C4L
C4 Cactus Mono 2014-
C4 Picasso TFT 2014-
C4 Picasso Mono 2014-
C-Elysee
DS3
DS4
DS5
Jumper 2015

Part 2: OBDSTAR PSA Dashboard and BSI mileage correction manual:

I Both the instrument and BSI support OBD calibration steps:

1.Turn on the ignition

2. Calibrate the instrument, and do not turn off the ignition after completion

3. Calibrate the BSI, and do not turn off the ignition after completion!! Power off the battery for 10 minutes

4. Reconnect the battery negative cable and complete

II. Steps of onty BSI supporting the OBD calibration:

1. Remove the instrument and use the programmer to calibrate it

2. Turn on the ignition and calibrate the BSI. Do not turn off the ignition after completion!! Power
off the battery for 10 minutes.

3. Put the instrument back into the vehicle

4. Reconnect the battery negative cable and complete

Note:

1. During the mileage adjustment process, ensure that the power is sufficient and the voltage is stable;
2. Before performing the adjustment, you must first read and save the instrument and BSI data (EEPROM and FLASH);
3. For the mileage reset, it needs to adjust the instrument and BSI module at the same time. If one of them is adjusted first, it will be synchronized by the data of another module and restored to the original mileage. The solution is as follows:

Method  1:

First remove the adjustment, do not pull the plug, and then adjust the instrument mileage through OBD. After the adjustment is successful, immediately unplug the instrument (as fast as possible), and then adjust the BSI mileage through OBD. The value is consistent with the instrument. After that, enter the reading mileage, confirm the mileage to be adjusted, and then install the instrument;

Method 2:

First adjust the instrument mileage through OBD. After the adjustment is successful, immediately unplug the instrument power supply fuse (as fast as possible, it is recommended to unplug the fuse before adjusting the instrument to check whether the instrument is powered off), and then adjust the BSI mileage through OBD. The value is consistent with the instrument. After that, enter the reading mileage, confirm the mileage to be adjusted, and then install the instrument fuse;

The instrument fuse is on the BSI, and the BSI position is generally below the steering wheel, as shown below.

Note: The position of the fuses may vary depending on years and models. According to the BSI module brand type, Valeo is generally F21, Continent is generally F19, and JOHNSON CONTROLS is generally F12…;

BSI menu is based on types, such as “CONTINENTAL BSI-Q0X”, where CONTINENTAL is the BSI brand name, Q0X is the BSI type, X stands for any number 0-9, the device can automatically recognize, if not, the types are not supported. Types can be seen on the BSI module label, as shown below.

Users can check PSA odometer Help menu in OBDSTAR X300 DP Plus tablet as well.

www.obdii365.com