OBDSTAR Update PSA MD1CS003 Locked ECU Tprot OFF Solution

Some customers reported issues with writing PSA Bosch md1cs003 locked ECU with OBDSTAR DC706/ECU Master. Car does not start after a few days.

OBDSTAR has now resolved the TPROT problem.

It adds MD1CS003 locked ECU Tprot OFF solution. 

Add Citroen/Peugeot/DS Bosch MD1CS003 (Locked) TC298TP R/W INT EEPROM,
R/W INT Flash, Tprot OFF functions (Support CS).

OBDSTAR ECU Master Clone Doosan DX140 EDC7UC31 ECU

OBDSTAR ECU Master latest user report:
Read/write ECU Doosan excavator DX140 EDC7UC31 on bench mode.
Requires C pack or heavy duty truck ECU software license activation.

Bench mode, no need to open ECU.
Read eeprom & flash OK.
Write eeprom & flash OK.
No checksum correction for this ECU.
1:1 Clone Ok.

Requires connecting a power supply (at least 13.5V).

 

OBDSTAR Adds MD1CS004 MD1CS014 MG1CS016 Boot Unlocking

 OBDSTAR released new car ECM, BCM and TCM types in September 2026.

 

Supported Tools

• X300 CLASSIC G3

• Dc706

• ECU MASTER A PACK

   

CAR ECU FLASHER SOFTWARE
UPGRADE

ECM [Version: V33.53]

1. Details Added:

• Add ASTON MARTIN BOSCH MED17.7.5 TC1793 R/W INT EEPROM,R/W INT FLASH,Write VIN functions(Support CS)(BOOT);

• Add AUDI BOSCH MD1CS004(LOCKED) TC298TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add AUDI BOSCH MD1CS014(LOCKED) TC299TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add BMW BOSCH EDC17C41 TC1797 R/W INT EEPROM,R/W INT FLASH,R/W ISN Code,Write VIN,IMMO OFF functions (Support CS)(BOOT);

• Add BMW BOSCH EDC17C50 TC1797 R/W INT EEPROM,R/W INT FLASH,R/W ISN Code,Write VIN,IMMO OFF functions (Support CS)(BOOT);

• Add BMW CONTINENTAL/SIEMENS/VDO MS43 AM29F400BB R/W EXT FLASH functions(Support CS)(BOOT);

• Add BMW CONTINENTAL/SIEMENS/VDO MSD85.x TC1796+ ST95128+M58BW016F R/W INT FLASH,R/W EXT FLASH,R/W INT EEPROM,R/W EXT EEPROM,R/W ISN Code functions(Support CS)(BOOT);

• Add CHANGAN DELPHI MT92.1/MT92C TC1728 R/W INT FLASH,IMMO OFF functions(Support CS)(BENCH);

• Add CHEVROLET SIMTEC 76 29F800BB R/W EXT FLASH functions (BOOT);

• Add CITROEN/PEUGEOT CONTINENTAL/SIEMENS/VDO SID 801 KLINE AM29F400BB+93C56 R/W EXT FLASH functions(BOOT);

• Add CITROEN/PEUGEOT CONTINENTAL/SIEMENS/VDO SID 804 KLINE AM29F400BB+93C56 R/W EXT FLASH functions(BOOT);

• Add FAW BOSCH MED17.8.2 TC1793 R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BENCH);

• Add HYUNDAI BOSCH MD1CS012(LOCKED) TC298TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add HYUNDAI BOSCH MEG17.9.12.1 TC1766 R/W INT EEPROM,R/W INT FLASH,Write VIN,IMMO OFF functions(Support CS)(BOOT);

• Add HYUNDAI CONTINENTAL/SIEMENS/VDO SIM2K-240 TC1767+TC1766 R/W INT EEPROM,R/W INT FLASH functions (Support CS)(BOOT);

• Add JAC AECS FC60 SPC574K72 Read INT FLASH,Write MAPS functions(Support CS)(BENCH);

• Add KIA BOSCH MD1CS012(LOCKED) TC298TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add KIA BOSCH MEG17.9.12.1 TC1766 R/W INT EEPROM,R/W INT FLASH,Write VIN,IMMO OFF functions(Support CS)(BOOT);

• Add KIA CONTINENTAL/SIEMENS/VDO SIM2K-240 TC1767+TC1766 R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add MAZDA MITSUBISHI GEN2 E6T6XXX MH8110 R/W MAPS functions(Support CS)(BENCH);

• Add MB BENZ BOSCH MED17.7.3.1 TC1797 R/W INT EEPROM,R/W INT FLASH,R/W EXT FLASH,Write VIN,IMMO OFF functions (Support CS)(BOOT);

• Add MB BENZ BOSCH MED17.7.5 TC1793 R/W INT EEPROM,R/W INT FLASH,Write VIN,IMMO OFF functions(Support CS)(BOOT);

• Add MINI BOSCH EDC17C41 TC1797 R/W INT EEPROM,R/W INT FLASH,R/W ISN Code,Write VIN,IMMO OFF functions(Support CS)(BOOT);

• Add NISSAN HITACHI A56-XXX CAN SH705828N R/W INT FLASH functions(Support CS)(BENCH);

• Add NISSAN HITACHI DEA030-XXX SH705927N Read INT FLASH,Write MAPS functions(Support CS)(OBD/BENCH);

• Add NISSAN HITACHI MEC501-XXX SH705519N R/W INT FLASH functions(Support CS)(BENCH);

• Add RENAULT BOSCH MG1CS016 TC399XP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BENCH);

• Add SEAT BOSCH MD1CS004(LOCKED) TC298TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add SKODA BOSCH MD1CS004(LOCKED) TC298TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add VOLKSWAGEN BOSCH MD1CS004(LOCKED) TC298TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT);

• Add VOLKSWAGEN BOSCH MD1CS014(LOCKED) TC299TP R/W INT EEPROM,R/W INT FLASH functions(Support CS)(BOOT).

2. Highlights Added:

• Add AUDI/SEAT/SKODA/VOLKSWAGEN CONTINENTAL/SIEMENS/VDO PCR2.1 TC1796 Write VIN function(BENCH).

TCM [Version: V31.09]

1. Details Added:

• Add CITROEN/PEUGEOT SIEMENS/CONTINENTAL AL4 SAK-C167 (AM29F200BB) Read/Write EXT FLASH functions(BOOT);

• Add ABARTH/FIAT MARELLI CFC319A.01 ST10F280 Read/Write INT FLASH functions(BOOT);

• Add BMW SIEMENS/CONTINENTAL GS20 SAK-C167(AM29F400BB) Read/Write EXT FLASH functions(BOOT);

• Add HYUNDAI/KIA SIEMENS/CONTINENTAL SIM2K-143 TC1738 Read/Write MAPS functions(Support CS)(BENCH);

• Add CITROEN/DS/PEUGEOT SIEMENS/CONTINENTAL SIM82 SAK-C167(AM29F400BB) Read/Write EXT FLASH functions(BOOT);

• Add CITROEN/DS/PEUGEOT/MITSUBISHI GETRAG SPS6 TC1766 Read/Write INT EEPROM,Read/Write EXT EEPROM,Read/Write INT FLASH functions(Support CS)(BENCH);

• Add CITROEN/DS/PEUGEOT GETRAG W6DGA TC1766 Read/Write INT EEPROM,Read/Write EXT EEPROM,Read/Write INT FLASH functions(Support CS)(BENCH);

• Add MB BENZ DSM (FB54) dedicated connectors C1033 support;

• Add MB BENZ DSM222(FB54) dedicated connectors C1033 support;

• Add MB BENZ ISM W164/W251(FB53) dedicated connectors C1033 support;

• Add MB BENZ ISM W212/W218(FB53) dedicated connectors C1033 support;

• Add MB BENZ ISM W221/W166(FB53) dedicated connectors C1033 support.

BCM [Version: V30.54]

Add SUZUKI BCM MAGNETI MARELLI R7F7016233 R/W INT FLASH,R/W INT EEPROM functions(JTAG).

OBDSTAR ECU Master Read Mazda Gen4 1N83M ECU

OBDSTAR ECU MASTER read and write Mazda Gen4  MCU 1N83M ECU successfully.

Mazda Melac Gen4 E6TAXXX MPC5746R (1N83M)

Bench mode.

Read flash ok.

Write flash ok.

Supports checksum correction.

 

 

OBDSTAR ECU Master Read and Write Chrysler GPEC3 ECU

In this article, we walk through the process of reading and unlocking a Chrysler Continental GPEC3 ECU using the OBDSTAR ECU Master programmer.

This guide covers boot mode reading, EEPROM and internal flash backup, ECU unlock, VIN writing, and checksum handling.

 

Previous Tool Attempts

Notably:

DC706 previous Chrysler old sw failed to read it in boot mode

Multiprog also failed to read it in boot mode

The ECU Master is being tried to see if it will work after the update.

 

Selecting the ECU in the Tool

The selection process:

• Select by brand — Continental
• Go to type
• Select GPEC3

There is also a new OBD option available from the recent update, but boot mode is being used for this demonstration.

Boot Mode Setup

For boot mode, the ECU must be opened. The connection requires:

A 120 ohm resistor between CAN L and CAN L.

Once the connections are made:

Select Start.

Select Boot to perform the reading.

Boot Loader and Connection

The tool waits for the boot loader to be written onto the ECU so it can connect. The boot loader begins loading — a good sign that connection will succeed.

The ECU Master connects successfully.

 

Reading the ECU

With the connection established, all functions are tested:

• Special functions
• Read EEPROM
• Read internal flash

 

EEPROM Reading

The internal EEPROM is read. This ECU uses an external EEPROM, so it can be opened and cloned by reading the external EEPROM.

Important note: The most important thing is to make sure the map — what is called the internal flash — looks the same, or the vehicle will throw codes that might not otherwise appear. This happens often.

The EEPROM is saved.

Internal Flash Reading

The internal flash is also read. The update appears to have helped. The tool reads all the sectors — approximately 20 sector addresses for the internal flash.

With this capability, one-on-one cloning is possible if the flash is not damaged and the client brings the ECU in. Both the external EEPROM and the internal flash can be read, meaning there may be no need to go online to update it or use another ECU to update the flash itself.

Tuning and VIN Considerations

For this ECU:

If you want to tune it, you must unlock it first before tuning.

If you want to change the VIN, that can be done in special functions — which the update reportedly added.

 

Saving the Flash

The flash is saved so that if the client wants it, the file is available. The tool prompts to save.

 

ECU Unlock

The ECU unlock function is selected. With ECU unlock:

It reads the internal flash

Read and save flash.

It will then write it back onto the ECU.

The unlock completes successfully.

VIN Writing

The VIN function is selected. The tool asks to select the EEPROM because the VIN is normally stored in the EEPROM.

For the GPEC3, there are three locations for the VIN. When changing any number:

The change is made (e.g., changing the last digit to 8)

The tool writes it automatically

To verify:

Read the EEPROM

Save it

Compare it with the edited version

The write can also be done for verification purposes. The original VIN is written back so it can be read in the ECU.

Important: With the VIN, you must select the EEPROM you want to change the VIN in. When the change is done, it writes it back. The tool reads to allocate the VIN numbers.

Note: The ECU Master requires an internet connection — without it, you cannot connect.
Writing the Flash Back

The flash is written back because of the unlocking performed earlier.

Checksum (CS) Correction

When you see CS in the ECU Master, it means checksum. The tool performs a checksum for you.

It cannot be given a 100% guarantee, but it works mostly on Bosch ECUs and some Continental ECUs

All the AC Delco ECUs it supports also get checksums

This is a Continental ECU, and the checksum is being performed on it.

The checksum takes a long time because it must be uploaded to the server. The server does a lot of work — it checks the file, goes through it, and brings it back for writing. This verifies the file is okay.

Note: Sometimes the checksum can be skipped if you don’t want a long wait, don’t have time, or have made edits that might not pass. However, the checksum is very important because it helps prevent breaking the ECU.

 

Writing Process

During writing:

Certain sectors are skipped

Only the needed sectors are written

This makes writing faster because skipping sectors avoids delays

The tool erases and writes sector 20 out of 20 addresses.

 

Sector 20 is written successfully. The tool is disconnected.

Summary

This case demonstrates reading and unlocking a Continental GPEC3 ECU with the OBDSTAR ECU Master. Key takeaways:

• The ECU Master’s new software matches DC706 functionality, with a recent OBD mode update
• Boot mode requires a 120 ohm resistor on the CAN line
• The tool connected successfully where Multiprog failed
• External EEPROM and internal flash can both be read for one-on-one cloning
• ECU unlock is required before tuning
• VIN writing requires selecting the EEPROM (three VIN locations on GPEC3)
• Checksum (CS) is handled via the server — important for preventing ECU damage
• An internet connection is required

Unlock Ford MD1CP006 ECU with OBDSTAR ECU Master

How to unlock 2021+ Ford trucks F-250 F-350 Bosch MD1CP006 locked TC298TP ECU with OBDSTAR ECU Master?

 

Tools required:
OBDSTAR ECU Master
OBDSTAR C4-06 adapter
Battery maintenance

 

Mode: Boot

Unlock protected ECUs directly in your workshop.
Read, write and perform a full backup in BOOT mode after the Unlock procedure.

Procedure:
Quick search MD1CP006
Select Boot mode.

Check instructions, PCB pinout and wiring diagram.

Connect ECU to the ECU Master with a jumper cable and the C4-06 adapter.

Then connect ECU Master to power supply.

Identify ECU.

Read MCU ID.

Read eeprom.

Read flash.

Write eeprom.

Write flash. Correct checksum by ECU Master.

Write ECU successfully.