Original OBDSTAR brand tools, including OBDSTAR X300 DP Plus, X300 Pro4, P50, Odomaster, X300M, DC706, Adapters and Test Platforms from obdii365.com.
User feedback: Honda SH 2019 motorcycle all keys lost, everything ok job done with OBDSTAR X300 Classic G3 in 20 minutes.
G3 comes with motorcycle adapter set in default.
Read immo data with mp001 first.
G3 will read pin code via dump and program key without issue.
Photo attached:
The OBDSTAR DC706 now offers direct support for Buick ACDelco E83 ECM pin code reading, mileage correction and IMMO OFF functionality directly within the device.
Tools required:
P004 adapter
Extra power supply
Quick search and select Buick Acdelco E83 MPC5565 ECM.
Check instruction and wiring diagram pinout.
Connect ECM with DC706 via P004 adapter.
Choose Bench mode with P004 adapter.
E83 Function List:
Connect ECU.
Read and save INT eeprom.
Read and save INT flash.
Read PIN Code. It will read 4-digit pin code.
Mileage correction.
Input mileage you desire and write new mileage.
IMMO OFF. Hit IMMO OFF and dc706 will turn off IMMO in one-click.
If need to clone ECM, connect donor ECM and write eeprom and flash into the ECM.
OBDSTAR DC706 supports checksum correction for int flash.
This module supports both Bench and Boot models. Bench mode is specifically used for data cloning. If the ECU freezes, you can use the BOOT mode for recovery.
OBDSTAR X300 DP Plus/X300 Classic G3 new FIAT & ALFAROMEO SOFTWARE released.
Details Added :
Add FIAT EUROPE EGEA CROSS 2024- PROXIMITY;
Add FIAT EUROPE EGEA CROSS 2022-2023 PROXIMITY;
Add FIAT EUROPE EGEA CROSS 2018-2021 PROXIMITY;
Add FIAT EUROPE EGEA CROSS 2015-2017 PROXIMITY;
Add FIAT EUROPE TIPO CROSS 2024- PROXIMITY;
Add FIAT EUROPE TIPO CROSS 2022-2023 PROXIMITY;
Add FIAT EUROPE TIPO CROSS 2018-2021 PROXIMITY;
Add FIAT EUROPE TIPO CROSS 2015-2017 PROXIMITY;
Add FIAT MIDDLE EAST EGEA CROSS 2024- PROXIMITY;
Add FIAT MIDDLE EAST EGEA CROSS 2022-2023 PROXIMITY;
Add FIAT MIDDLE EAST EGEA CROSS 2018-2021 PROXIMITY;
Add FIAT MIDDLE EAST EGEA CROSS 2015-2017 PROXIMITY;
Add FIAT MIDDLE EAST TIPO CROSS 2024- PROXIMITY;
Add FIAT MIDDLE EAST TIPO CROSS 2022-2023 PROXIMITY;
Add FIAT MIDDLE EAST TIPO CROSS 2018-2021 PROXIMITY;
Add FIAT MIDDLE EAST TIPO CROSS 2015-2017 PROXIMITY.
Details Optimized :
Optimized HAT AUSTRALIA SCUDO 2022-2023 BLADE;
Optimized HAT EUROPE SCUDO 2022-2023 BLADE;
Optimized HAT EUROPE DOBLO 2023-2024 BLADE.
ALFAROMEO :
Details Added :
Add ALFAROMEO JUNIOR(EV) 2024- Read PinCode;
Add ALFAROMEO JUNIOR(EV) 2024- PROXIMITY All Smart Keys Lost;
Add ALFAROMEO JUNIOR(HYBRID) 2024- Read PinCode;
Add ALFAROMEO JUNIOR(HYBRID) 2024- PROXIMITY All Smart Keys Lost.
Possible to Clone PSA BSI N03 with OBDSTAR DC706 or G3?
Yes, DC706 will clone this BSI.
Review 1: I work this same bsi, and lets go finish ok.
Review 2:
100% I've read a BSI N03 with my DC706. And that was with a corrupted EEPROM and it still read.
Review 3:
Working today perfectly with a proper power supply took a while to connect. Then read and write perfect 10 mins to clone from start to finish.
Renault koleos 2020 all keys lost situation.
Key: Card
Programming with OBDSTAR X300 Classic G3.
Choose free risk method.
Read pincode via dflash before using all key Lost option no problem.
Failed to program via dealer key option (programming via dump and key in OBDSTAR key sensor area): Said key successful programming but 0 key in bsi.
Choose programming key all key Lost: programming directing in ignition coil. Program successfull and 1 key bsi.
10 minutes job, car start remote good
JOB DONE.
How to replace Dacia Sandero 2013-2019 Continental UCH with JCI using OBDSTAR X300 Classic G3. It is similar to older Renault/Dacia cars.
NOTE: You will need G3. X300 DP Plus does not have ECU advanced function.
This may not work on every Renault/Dacia. Always check G3 coverage and function before operation.
Read original UCH information.
Go to ECU Advanced- Renault/Dacia->BCM/UCH
Drop down list and find Logan-> 2012 onwards-> Continental
Read ECU info.
OBDSTAR will read part number, VIN, keys, etc info.
You can read Dflash and extract a PIN code from the BCM / UCH memory.
If failed to read pin code under ECU Advanced function, try to extract pin code via method 2 here.
Autel tools are used to be able to change UCH VIN for these Renault. But it no longer reads pin code.
Once you get the pin code. Replace the Continental UCH with the JCI one.
Go to ECU Advanced- Renault/Dacia->BCM/UCH
Drop down list and find Logan-> 2012 onwards-> Johnson
Reset BCM.
BCM is blank.
Select Program BCM.
Follow 3 steps to program BCM.
Press Start.
The function will learn new ISK codes to the body control module (BCM).
Turn off the ignition switch.
Enter 32-digit pin code.
Switch ignition off.
Insert the key and turn on the ignition switch.
Turn on the ignition switch twice to save key information.
BCM programming successfully.
Turn on the ignition switch twice to save key information.
Read ECU info. There is only 1 key in the system.
We need to add the 2nd key with OBDSTAR G3.
Select Program Keys function.
Follow 5 steps to program 2nd key.
Switch ignition off.
Enter 32-digit pin code
Turn off the ignition and remove the key.Press OK to learn next key.
Insert the key and turn on ignition.
It reads key ID.
Learn key success.
Switch ignition off and remove key.
Read ECU info again.
You can see 2 keys programmed and the VIN is the same as original BCM/UCH.
Test keys.
Done.
Here obdii365.com introduces two ways to add a blade key to Renault Kadjar 2018-2019 using OBDSTAR X300 Classic G3 or x300 dp plus via OBD.
Procedure:
Decode and cut Renault VA2EH2 key blade with Xhorse Dolphin XP005L.
Generate correct remote using KD XN universal remote.
Then program key with OBDSTAR G3.
Go to Renault/Dacia, auto detect vehicle information.
This car uses blade key. Choose Blade key.
There are two ways to program blade key.
Way 1 witout risk and way 2 risky.
Way 1 without risk
Read immo information.
Turn on the emergency indicators. Turn off the ignition switch.
It takes 1-10 minutes to read pin code.
After read pin code, then perform make dealer key and program key procedures.
Way 2 risky.
Here we use risky method 2.
Here is a dangerous method with extracting a pin code directly from the BCM / UCH memory. If time allows, it is better to use a safe method.
Select Risk way.
Read immo information as well.
Select Read Dflash.
Turn ignition off.
Read the OBDSTAR caution on this vehicle.
The key will be erased during the process of reading Dflash.
There will be the risk of reading failure because of no pin code in UCH of very few models. After reading the Dflash, must perform All Keys Lost to program keys.
Must have stable network connection and extra power supply.
Deleting key.
Read Dflash and save data.
Select All keys lost function.
Select Make dealer key.
Choose Dflash just saved.
OBDSTAR G3 will extract pin code from the UCH dflash dump.
Put the new key in the key sensing coil.
Generate dealer key successfully.
Select Program Keys.
Turn on the emergency indicators.
Select the Dflash data.
Insert key and turn on ignition switch.
Program key successfully.
If need to add more keys, perform “Program Keys” again.
Test new keys.
http://blog.obdii365.com/2025/02/09/2-ways-to-add-renault-kadjar-2019-uch-blade-key-with-obdstar-g3/
