Read 2020- FIAT Hybrid IMMO Data with OBDSTAR G3

OBDSTAR X300 Classic G3 update EUROPEN Fiat PANDA/500/NEW DOBLO HYBRID and LANCIA YPSILON 2020-2024 blade key programming in July 2024.

Background: Read IMMO Data by BCM, which can be used for showing IMMO information, making dealer keys, etc.
Note: The following steps are based on KEYMASTER G3 as an example, please strictly follow the device prompts to operate.
Preparation: KEYMASTAR G3, OBDII main cable.

Detailed steps:

1. Connect the KEYMASTAR G3 to the vehicle by the OBDII main cable and enter【IMMO】interface

2. Tap the search box in the upper right corner and search for【FIAT】

3. Select【Manual Select System】

4. Select【BSI(PRE-CODING)】

5. Select【DELPHI 70F3632/70F3633(ID46)】

6. Select【TYPE 3(2020-Hybrid)】

7. Make sure the network is connected and tap【OK】

8. Select【Advanced Functions】

9. Select【Read IMMO Data】

10. Turn on the ignition switch and tap【OK】to start reading

11. Read successfully, tap【OK】

12. Confirm the file name and tap【OK】

13. Show IMMO Info.

Then you can make dealer key and learn key with the immo data. 

How to Modify OBDSTAR Toyota 30PIN Cable V2 for Autel?

 Question:

I bought the OBDSTAR Toyota 30 Pin v2 ( blue connector ) bypass cable which is different from the previous version and is not compatible with Autel IM608, I guess they changed because a lot of people were buying it to use with Autel.
And I’m trying to modify to use with Autel.
Any ideas, does anyone have tried to modify the cable for that purpose?

Here is the clue.

Twist 2 wires.
Add 2 wires and done.

OBDSTAR G3 Read and Write Ford SID209 in Boot

 OBDSTAR DC706 and X300 Classic G3 update Ford SID209 ECM reading and writing in boot mode. Here we will show how to read SID209 in boot using G3. Some users report they can write flash only on SID208/SID209, cannot write eeprom on bench and there is no boot mode option to read these ECMs. OBDSTAR now adds boot mode for these options.

Tools required:

OBDSTAR DC706 or x300 classic G3 with ECU license

MP001 programmer

SID209 ECM

Extra Power supply

Procedure:

Make sure update ECM software to V31.00 and newer.

Go to ECM V31.00, quick search SID209 and select Ford Continental SID209 TC1797

Select boot mode, read instructions and check wiring diagram.

Connect ECM with MP001 and Bench V3 jumper

Also need to power supply.

Select Boot mode with MP001.

Press Connect.

Read INT flash and save data.

Read INT eeprom and save data.

Back up data successfully.

 

Write INT flash.

Load external data and select INT flash we have backed up.

Write flash successfully.

Write eeprom.

Load external data and select INT eeprom we have backed up.

Write eeprom successfully.

Don’t forget to press Disconnect after finish.

 

www.obdii365.com

OBDSTAR Update Corolla 2023- Duster 2021- Sentra 2022- AKL

 OBDSTAR released new Honda, Nissan, Renault, Toyota, GM immobilizer software in Sep. 2024.

 

These upgrades can be applied to OBDSTAR X300 Classic G3, X300 DP Plus, X300 Pro4 and X300 Mini series.

 

Honda V41.78 

Add proximity key programming (Supported AKL) function for below models:
• HONDA ACCORD 2022-
• HONDAAVANCIER 2022-
• HONDA BREEZE 2022
• HONDA ELYSION 2022-
• HONDA INSPIRE 2022-
• HONDA ODYSSEY 2022
• HONDA UR-V 2022-
• HONDA VEZEL 2023-

 

GM V43.79

1. Add blade key programming (Supported AKL) function for below models:
• BRAZIL CRUZE 2012-2023

• BRAZIL TRAX/TRACKER 2013-2019
2. Add proximity key programming (Supported AKL) function for below models:
• BRAZIL CRUZE 2017-2023

• USA-CANADA GROOVE 2021-
3. Optimized software

 

 

Renault V41.61

1. Add below models:
• DACIA DUSTER 2021- BLADE Program Keys(Supported AKL)
• DACIA SANDERO 2021- Program Keys(Supported AKL)
2. Optimized software

 

Mazda V41.21

Add Erase DTC function for CHINA MAZDA3 (AXELA) PROXIMITY 2020-.

 

Opel V40.8

Add blade key programming (Supported AKL), Make Dealer Key,
Read IMMO data, Show IMMO Info and Unlock Keys functions for below models:
• COMBO LIFE 2020-2024

• MOVANO 2020-2023 TYPE 2

 

Toyota V40.07 

1. Add key programming (Supported AKL) function for below models:
• TOYOTA COROLLA 2023-

• TOYOTA PROACE CITY 2020-2024
2. Optimized software.

 

Nissan V42.58 

Add proximity key programming (Supported AKL) function for below models:
• NISSAN NORTH AMERICA SENTRA 2022-
• NISSAN SOUTH AMERICA SENTRA 2022-

 

Ford V44.89

Add key programming (Supported AKL) function for below models:
• FORD EUROPE PUMA BLADE 2019-2023(Beta)
• FORD EUROPE TOURNEO CONNECT PROXIMITY 2020-2021 (Beta)
• FORD EUROPE TRANSIT COURIER BLADE 2021-2023(Beta)

OBDSTAR DC706 Update Checksum for Delphi DCM7.1AP

 OBDSTAR DC706 & G3 released new ECM software in Sep. 2024.

Car ECM V31.13
Adds Checksun Correction for Delphi DCM7.1AP TC277T series

Motorcycle ECM V30.12
Add read/write MAPS function for Harley Delphi MT21 TC265D

OBDSTAR OdoMaster Adds BRONCO 2021 R7F701441 Mileage Correction

OBDSTAR Odomaster and G3 with mileage license released new mileage software in Sep. 2024. 

Subaru V41.31

Add Mileage Calibration function for SUBARU LEGACY 2015- NEC

D70F3529.

Nissan V40.96

Add Mileage Calibration function for NISSAN LAFESTA 2011 93C66

Toyota V40.40

Add Mileage Calibration function for TOYOTA SCION IA

Ford V41.49

Add Mileage Calibration function for below models:

• FORD BANTAM NEC+24C16

• FORD BRONCO 2021 TYPE3(7 INCHES R7F701441)

• FORD C-MAX HYBRID 2015- DENSO SPC5606S+93C86+2XLCD

• FORD ECOSPORT 2013- TYPE3(MC9S12XEQ384)

• FORD ESCAPE 2006-2008 93C56

• FORD EXPEDITION 2015- CONTINENTAL(SPC5606S)

• FORD EXPLORER 2015- TYPE2(V1 DENSO SPC5606S+93C86+2XLCD)

• FORD EXPLORER 2015- TYPE3(V2 DENSO SPC5606S+93C86+2XLCD)

• FORD EXPLORER 2011- TYPE2(NEC+93C86+2XLCD)

• FORD F150 2015- TYPE3(MPC5606S+24C32)

• FORD F150 2013- MPC5604S+24C32

• FORD F250 2011- TYPE2(MB91F037+93C86)

• FORD FIESTA 2013- TYPE3(MC9S12XEQ384)

• FORD FIESTA 2008- MC9S12HZ256

• FORD FIESTA 2006- MC9S12H256

• FORD FIGO/ASPIRE 2017- R5F10DPJJ

• FORD FIGO/ASPIRE 2015- R5F10DPJJ V1

• FORD FIGO/ASPIRE 2015- R5F10DPJJ V2

• FORD FOCUS 2 2008- HI (MC9S12XHZ512)

• FORD FOCUS 2 2008- LO (MC9S12XHZ512)

• FORD FOCUS 2 2005-2008 MC9S12H256

• FORD FOCUS 3 2011- NEC+95320

• FORD FOCUS EV 2013- DENSO SPC5606S+93C86+2XLCD

• FORD GALAXY 2010- HI (MC9S12XHZ512)

• FORD GALAXY 2010- LO (MC9S12XHZ512)

• FORD GALAXY 2006- LO (MC9S12H256)

• FORD GALAXY CONVERS+ MAC7116+24C16

• FORD FUSION 2015- CONTINEN7AL(SPC5606S)

• FORD FUSION HYBRID 2015- DENSO SPC5606S+93C86+2XLCD

• FORD FUSION USA 2011- NEC3423+93C86+2XLCD

• FORD KA 2017- R5F10DPJJ

• FORD KA 2015- TYPE1 (R5F1ODPJJ V1)

• FORD KA 2015- TYPE2(R5F1 ODPJJ V2)

• FORD KUGA 2008- HI (MC9S12XHZ512)

• FORD KUGA 2008- LO (MC9S12XHZ512)

• FORD KUGA 2 2013- MPC5604S+24C32

• FORD KUGA 2 2013- MPC5645S+24C32

• FORD MONDEO 2015- CONTINEN1AL(SPC5606S)

• FORD MONDEO 2010- HI (MC9S12XHZ512)

• FORD MONDEO 2010- LO (MC9S12XHZ512)

• FORD MONDEO 2007- LO (MC9S12H256)

• FORD MONDEO CONVERS+ MAC7116+24C16

• FORD MONDEO HYBRID 2015- DENSO SPC5606S+93C86+2XLCD

• FORD MONDEO VISTEON 2015- SPC5606S+24C32

• FORD MUSTANG 2013- SPC5606S+24C32

• FORD RANGER 2015- DENSO SPC5645S+93C86+2XLCD

• FORD RANGER 2015- CONTINEN1AL(SPC5606S)

• FORD TRANSIT 2011- NEC+95320

• FORD TRANSIT MK8 2016- NEC70F3525

• LINCOLN MKZ 2015- DENSO SPC5606S+93C86+2XLCD

• LINCOLN MKZ 2011- NEC3423+93C86+2XLCD

OBDSTAR Program Nissan Kicks 2019 All Keys Lost via OBD

 Autel or OBDSTAR device to program Nissan Kicks 2019 all 4A smart keys lost? Let’s explore.

First of all, generate Autel universal Nissan style ikey remote with Autel KM100.

Generate remote under Nissan Kicks 2017-2022 433MHz ID4A option.

We use KM100 to program key. Do an IMMO Status scan.

It says 20-digit password calculation is supported but it still asks for 20-digit password.

If we go to Immo/Smart system->Smart key-> Smart key learning (guided), it still asks for 20-digit password.

 

Then we try OBDSTAR X300 DP Plus. It says 20-digit password calculation is supported.
We select All keys lost.

All keys will be erased.

Turn off the ignition and turn on the emergency switch.

Press the start button, the indicator flashes on the start button, 5 seconds with 1st smart key logo on the center of the start button, dashboard will turn on automatically.

Switch ignition off and wait 5 sec
Program 1st key success.

Press the Start button with the 1st smart key within 5s.
Then release it and attach it to the Start button until the ignition is on and the buzzer beeps.
Switch ignition off and wait 5 sec.

Program completed.

Test the new smart key.

OBDSTAR program Kicks 2019 smart key successfully.

www.obdii365.com

http://www.key-programmer.org/2024/09/13/obdstar-x300-dp-plus-program-nissan-kicks-2019-all-keys-lost/