OBDSTAR Update Ducati Motorcycle till 2026

OBDSTAR update Ducati motorcycle till year 2026.

DUCATI

[Version: V33.30]

1. Supports models up to the 2026 model year.

2. Add below models:

• Xdiavel V4 E5+

• Multistrada V4 Pikes Peak E5+

• Panigale V4 E5+

• Panigale V2 E5+

• Multistrada V4 Rally E5+

• Multistrada V2 S E5+

• Hypermotard 698 Mono E5+

• Streetfighter V4 E5+

• Multistrada V4 E5+

• ...

Supported Tools

• X300 Classic G3

• MK70

• MOTOMASTER

• ODO MASTER

• ISCAN DUCATI

Supports models up to the 2026 model year.
Add below models: XDiavel V4 E5+, Streetfighter V4 E5+, Streetfighter V2 E5+
Add special function descriptions (usage scenarios and expected results).
Add transport mode enable/disable function for below models: Scrambler E5/E5+
Add below special function for Panigale V4 E5+:DRL On/Off
Add below special functions for XDiavel V4 E5+:
TPMS registration
TPMS code programming
Oil service
Valve check
Annual service
Next oil service reset
Next valve service reset
Next annual service date modification
Current dashboard date modification
Current dashboard time modification

Add below special functions for Streetfighter V4 E5+:
VIN writing
GPS model configuration
TPS adaption reset
GPS coordinate data synchronization
Throttle balance
Debug package enable/disable
Odometer writing (accumulator)
ABS setting in EOL mode
Debug package reset

Add below special functions for Streetfighter V2 E5+:
Fuel level value reset
Battery voltage history display
Version setting in BBS
Key reset
Next service date adjustment
Gear reset
Battery voltage history reset

 

How to Set up OBDSTAR Tools for BMW MDG1 Bench Unlocking?

 

Some customers do not know how to connect/set up the OBDSTAR ECU Master/ X300 Classic G3/ DC706 devices to perform 2020.06- BMW MD1/MG1 ECU bench unlocking.

 

Here is the clue.

 

For OBDSTAR ECU Master

 

Method 1: ECM-003 Bench Connection

Tools used:

• OBDSTAR ECU Master
• ECM-003 BMW bench adapter
• Bench DV1 cable
• USB cable
• Power supply

Connection Guide

Connect ECU Master with PC via USB cable.

Connect Bench DV1 cable to C3 connector of the ECU Master device.


Connect the other end of Bench DV1 cable to the ECM003 adapter.

Connect ECM-003 adapter to the ECU.

Connect the power supply to the ECU Master.

Ready to unlock, read and write ECU with ECU Master.
Method 2: Jumper cable connection

Tools used:

• OBDSTAR ECU Master
• 3 in 1 jumper cable
• Bench jumper cable
• USB cable
• Power supply

Connection Guide
Connect ECU Master with PC via USB cable.
Connect Bench jumper cable to the C3 connector of the ECU Master device.

Connect jumper cable to the ECU according to the wiring diagram.

Connect power supply to the ECU Master.

Ready to unlock, read and write ECU with ECU Master.

For OBDSTAR G3/DC706

 

G3 and DC706 share the same connection method.

 

Method 1: Bench adapter connection

Tools used:

• G3/DC706
• Main cable
• MP001 programmer
• Converter V2 or P004 adapter
• ECM-003 dedicated bench adapter
• battery stabilizer

Connection Guide

Connect G3 or DC706 with MP001 programmer via main cable.
Connect converter V2 or P004 adapter with MP001’s C2 connector.

Connect ECM-003 adapter with converter V2 or P004 adapter.


Connect ECM-003 adapter to the ECU.

Connect power supply/battery stabilizer to the main cable.

Ready to unlock ECU on bench mode.
Method 2: Jumper cable connection 

Tools used:

• G3/DC706
• Main cable
• MP001 programmer
• 3 in 1 jumper cable
• bench jumper cable
• battery stabilizer

Connection Guide:

Connect G3 or DC706 with MP001 programmer via main cable.
Connect jumper cable to the MP001’s C2 connector.

Connect jumper cable to the ECU according to the wiring diagram.


Connect power supply/battery stabilizer to the main cable.

Ready to unlock, read and write ECU on bench mode.

www.obdii365.com