Clone Alfa Romeo 4C BCM with OBDSTAR DC706

 In the world of automotive electronics, cloning control units is a valuable skill, especially when dealing with high-end vehicles like the Alfa Romeo 4C. In this article, we’ll walk through the process of cloning the Body Control Module (BCM) of an Alfa Romeo 4C using the OBDSTAR DC706 ECU cloning tool.

DC706 has no this Alfa option, but we can do it under Fiat BSI option.

Introduction to the BCM and Cloning Process

The Body Control Module (BCM) is a crucial component in modern vehicles, managing various electronic functions such as lighting, door locks, and other body-related systems. In the case of the Alfa Romeo 4C, the BCM is part of the Fiat group, which includes brands like Fiat, Lancia, and Jeep. This means that the BCM used in the 4C is also found in other vehicles within the Fiat group, making it easier to source replacement units.

Cloning a BCM involves extracting the firmware and coding from a donor unit and transferring it to a replacement unit. This process is particularly useful when the original BCM is damaged or needs to be replaced, as it allows the new unit to retain the vehicle-specific coding and programming.

 

Tools and Equipment Needed

To perform the cloning process, you’ll need the following tools:

1. OBDSTAR DC706 Tool: This is the primary device used for reading and writing the BCM data.
2. P004 Adapter: Specialized cables are required to connect the BCM to the DC706 tool.
3. Donor BCM: A replacement BCM from a compatible vehicle (in this case, a Fiat 500 was used as the donor).
4. Internet Connection: The DC706 tool requires an internet connection to access necessary data during the process.

Step-by-Step Cloning Process

Selecting the BCM: The first step is to identify and select the correct BCM module. Select the BCM from the Fiat group, specifically the Delphi 70F3632/33 model, which is compatible with the Alfa Romeo 4C.

Connecting the BCM: The BCM is connected to the DC706 tool using specialized adapter cables. The tool provides a pinout diagram to ensure the correct connections are made. The BCM is powered through pins 11 (positive) and 10 (negative).

Reading the Data: Once connected, the DC706 tool is used to read the data from the donor BCM. This includes extracting the EEPROM, flash memory and read pin code. The tool reads the data and saves it to a file, which will later be written to the replacement BCM.

Writing the Data to the Replacement BCM: After extracting the data, the next step is to write it to the replacement BCM. The replacement unit is connected to the DC706 tool, and the previously saved data is written to its EPROM and flash memory. The tool verifies the data during the writing process to ensure accuracy.

Verification and Completion: Once the data has been successfully written, the replacement BCM is ready to be installed in the vehicle. The cloned BCM will now have the same coding and programming as the original, allowing it to function seamlessly in the Alfa Romeo 4C.

 

Benefits of Cloning the BCM

Cloning the BCM offers several advantages:

• Cost Savings: Purchasing a new BCM from the manufacturer can be expensive. By cloning a used or donor unit, you can significantly reduce costs.
• Availability: Finding a compatible BCM from a donor vehicle (such as a Fiat 500) is often easier than sourcing a brand-new unit.
• Vehicle-Specific Coding: Cloning ensures that the replacement BCM retains the original vehicle’s coding, preventing issues with vehicle electronics and ensuring proper functionality.

Conclusion

Cloning the BCM of an Alfa Romeo 4C using the OBDSTAR DC706 tool is a practical and cost-effective solution for replacing a damaged or faulty control unit. By following the steps outlined in this article, you can successfully clone a BCM and ensure that your vehicle’s electronic systems continue to function as intended. This process not only saves money but also provides a reliable way to maintain your vehicle’s performance.

www.obdii365.com