Activate 2019 KTM 1290 Cruise Control with OBDSTAR MotoMaster

How to Activate 2019 KTM 1290 Super Adventure S Cruise Control with OBDSTAR MotoMaster or MS80?

Preparation: MOTOMASTER, M001A, M019.

Detail Steps:

Select MOTO Diag--KTM--Latest Version to enter Diagnosis-By model

Sequentially select 1 >1290 > 1290 SUPER ADVENTURE S >Motorcycle (Road)1(2017-2020)

Click Manual selection

Click ENG,then click Enter.

Click Special Function, follow the prompts, enter the password 123, Click OK.

Click ECM reset (Mode 1).

Click OK.

Operation completed. If the cruise control indicator light on the vehicle instrument panel starts to flash, please perform the following activation steps: 

Method for Activating the Cruise Control Function

1) Turn on the vehicle's ignition switch and start the engine ;

2) Observe the cruise control indicator on the instrument cluster. If it is flashing yellow, a learning procedure is required ;

3) Locate the【1】button on the cruise control lever of the left handle (this button can be toggled in three directions: left, up and down) ;

4) Press and hold the lever to the left for 3 seconds ;

5) Move the lever to the【RES/+】position and hold for 3 seconds ;

6) Move the lever to the【SET/-】position and hold for 3 seconds ;

7) Roll on the throttle grip, then release it ;

8) The cruise control indicator turns off, indicating learning is complete ;

9) Turn off the vehicle's ignition switch.