OBDSTAR 2023 BMW R 1250 GS ADVENTURE Service Reset Guide

How-to: reset 2023 BMW R 1250 GS ADVENTURE motorcycle service light using OBDSTAR motorcycle scanners.

Background

After performing regular maintenance on a BMW motorcycle (such as oil changes), the dashboard shows an incorrect maintenance reminder caused by a malfunction, or after carrying out special maintenance such as brake pad replacement, you will need to use the service reset function of the diagnostic scanner. This function will reset the vehicle' s maintenance reminder and allow you to manually set the recommended mileage and date for the next service based on the current maintenance condition.


Tools used

Preparation: MOTOMASTER/MS80/iscan BMW, M001A


Solution:

Solution:

When the service lamp is illuminated or the service interval is reached, use OBDSTAR MOTOMASTER to perform the [BMW] system -[Service Lamp Reset] function and reset the vehicle's service parameters, clearing the service lamp.

Steps:
1. Select [MOTO Diag]--[BMW]--Latest Version to enter [Diagnosis]

2.Click New Version (–2025)

 

3. Auto Identify[VIN]

4. Click [Read], wait for the device to read the vehicle identification number (VIN), then click [OK]

5. Verify that the Input VIN is correct, then click [OK].

 

6. Confirm the identified vehicle model year, and click [OK] if correct.

7. Choose [Common Special Functions] (You can also find the Service reset function in the service menu).

8. Click Service Lamp Reset

 

9. Click Enter

 

10. Before performing the settings, please first confirm if the following vehicle information is accurate :

A. Current total distance: 1,283 km

B. Current calendar date: 9.8.2025

C. Next service date: 7.2026

D. Service remaining distance 0 km (This means the preset service mileage is used up and needs to be reset immediately)

E. Target odometer reading service 1283 KM

Confirm that the above 5 items are correct, please click [①Continue with setting the Service Interval Indicator]

11. 

First, the system will show two sets of dates:

A. Instrument Cluster Date: The current calendar date of the vehicle

B. Scanner Date: The current calendar date of the tester

 

Please verify that the Instrument Cluster Date (A) is accurate. If incorrect, choose one of the following options to correct it:

Please verify and confirm whether the vehicle instrument cluster date (A) is accurate. If the date or time is incorrect, Perform calibration in any of the following ways:

1. Synchronize the device time: Click [①Accept the date and time from the diagnosis system] to synchronize the vehicle's device with the diagnostic scanner ;

2. Set manually: Click [②Set calendar date manually] to input the correct date and time directly.

 

After confirming or adjusting the date, click [③Continue with setting the Service Interval Indicator]

 

The diagnostic device has automatically generated default service recommendations based on the vehicle' s date and mileage: the next service is due at 10,000 km or in 1 year.

The maintenance parameters can be flexibly configured via any one of the following four methods according to the actual maintenance requirements:

①Accept service data: Accept the recommended 10,000 km / 1-year interval

②Adjust remaining mileage: Manually enter a custom mileage interval

③Adjust service date: Manually select a future service due date

④Adjust remaining mileage and service date Back: Manually enter a custom mileage and select a custom due date

 

Select the method based on your maintenance plan. Once set, you can continue with the next steps.

 

 

12. The service data for the next service has been successfully set. If the service parameters are incorrect, you can reset them following procedure outlined above.